M36N Mezzanine Card with 8/16 Analog Inputs, 16 Bits M-Module The M36N is an M-Module with 8 differential voltage or current inputs, or 16 single-ended voltage or current inputs and 16 bits resolution. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M36N is a 16-bit analog M-Module for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current. The isolated supply voltages are generated by an onboard DC/DC converter, which supports an extended temperature range of -40 °C to +85 °C. A fast A/D converter and auto-incrementation of the multiplexer channel make the M-Module ideal for fast sampling. The complete acquisition time of an M36N is 130 µs for all 16 channels. The M36N features totally automatic adjustment of each channel and each input range. The FPGA implemented on the M36N controls the signal conditioning and in addition offers space for application-specific function extensions of the board. The M36N is designed for a large range of applications, for example in automated test environments or process control systems. The M36N is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 8/16 current or voltage inputs 16 bits resolution 8.5 °s max. channel acquisition time Precision +/- 0.05% typ. Unipolar/bipolar software-selectable Sample and hold Autoincrementing of channel number External triggering Electrical isolation (500 V) -40 °C to +85 °C

M11 Mezzanine Card with 16-bit TTL I/O Interface M-Module The M11 is an M-Module with 16 TTL I/O lines that can be used separately as two ports with 8 bits each or together as a 16-bit port. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The M11 mezzanine card is a TTL I/O M-Module with 16 lines (Ports A and B) that can be used separately as two ports with 8 bits each or together as a 16-bit port. Control of the I/O lines is via the four handshake lines. Depending on the operation mode, the four handshake lines generate an interlocked handshake, a pulsed handshake, interrupt inputs or simple inputs. The M11 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME oron any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 18 TTL inputs/outputs 4 handshake lines Programmable timer 24 bits resolution -40 °C to +85 °C

NL30 Robust 12-Port Fully Managed Ethernet Switch Layer 2/3 Switch with M12 Front Connectors & Fiber Option Rugged 12-port Gigabit Ethernet switch with layer 2/3 extension, M12 connectors and optional fiber-optics on the front panel. "NL" Family Principle duagon's "NL" Ethernet switch family principle is based on a wide range of configuration options (e.g., amount of Ethernet ports, fiber connections or Power over Ethernet) to easily adapt the switch to application requirements. Flexible Concept in a Small Housing The NL30 is a 12+2-port fully managed layer 2/3 Ethernet switch, providing a wide range of configuration options with 12 M12 Gigabit Ethernet ports. M12 connectors can be configured to be A-, D- or X-coded and combinations are also possible. The X-coded connectors are designed as push-pull and screwed variants (Harting concept). The NL30 offers two optional Ethernet fiber ports with 1000BASE-SX as standard variant. The mechanical concept is an extremely compact, high-quality aluminum housing providing high port density and ultra-high ruggedness. It is designed for wall-mounting, but mounting in a 19" rack is also an option. Product models without optional fiber ports are available in a housing with reduced height. Performance, Security and Diagnostic Features The 29 Gbit/s, TCAM based, store-and-forward switching matrix of the NL30 allows high-performance layer 2 switching over all connected interfaces. For easy remote management and access, layer 3 protocols, e.g., IPv4/IPv6 and DHCP, are integrated. The switch provides extended security features like SNMPv3, SSH and HTTPS. Traffic isolation (VLAN) and switching redundancy protocols (e.g., STP, RSTP, MSTP) provide safe running of the network using redundant data paths in the event of a fault. The ITU-T G.8031/G.8032 ring and linear protection switching feature set makes NL30 able to create network ring scenarios with recovery time under 50 ms. Monitoring and diagnosis functions, e.g., sFlow or SNMPv1, v2c, v3 are provided. Wide-Range Power Supply The EN 50155 compliant supply voltage range of 24 V DC to 110 V DC provides maximum flexibility for using the switch. Maintenance Free and Extremely Rugged The NL30 is designed for fanless operation at temperatures ranging from -40 °C to +70 °C (10 min @ +85 °C). The cooling fins serve as a heat sink for the internal electronics. It is maintenance-free and developed specifically for rough environmental conditions in rolling stock applications. Long-term availability until 2026 from product start minimizes lifecycle management by making the system available at least for this period of time. 12x 10/100/1000BASE-TX ports 2x 10/100/1000BASE-TX uplink ports with bypass relay on one uplink pair M12 A-, D- or X-coded (screwed and push-pull) Ultra-wide range rail power supply: 24 V DC to 110 V DC ITU-T G.8031/G.8032 Ethernet linear and ring protection switching 2x 1000BASE-SX fiber uplink (Q-ODC) (optional) -40 °C to +70 °C (+85 °C), fanless EN 50155 compliant (railways)

A201S M-Module Carrier Board for 4 Mezzanine Cards 6U VMEbus The A201S is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measuring and instrumentation, communication or special-purpose tasks. The A201S is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measuring and instrumentation, communication or special-purpose tasks. The M-Modules are screwed tightly on the carrier board, but the board needs only one slot on the VMEbus. Please note that since all three rows of the P2 connector are used for user I/O, board models with this connector are not compatible with VME64 backplanes. An interrupt controller handles the M-Modules individually. In VMEbus D16 systems the I/O signals of the M-Modules can be accessed from P2/J2 inside the rack. 4 M-Module slots 1 VMEbus slot VMEbus slave A16/A24/D16, interrupter -40 °C to +85 °C (depending on model)

NM11 Smart Managed 8-Port Railway Ethernet Switch with PoE Rugged Embedded Network Box The NM11 family is a range of fanless and maintenance-free Power over Ethernet switches with IP40 protection, which have been specifically designed for use in rolling stock and automotive applications operating in extremely rugged environmental conditions. Maintenance-Free and Extremely Rugged The NM11 family is a range of fanless and maintenance-free Power over Ethernet switches, which have been specifically designed for use in rolling stock applications operating in extremely rugged environmental conditions. Versatile Application Possibilities The NM11 range of switches provide eight channels at the front panel, accessible through M12 connectors, and cover different application requirements including Power over Ethernet (PoE), IEEE802.3at type 1 and type 2 (previously af and at) compliant, and either 100 Mb or 1 Gb Ethernet interfaces. Compliant to Railway Standards The voltage supply for the NM11 Ethernet switch is designed for maximum flexibility and supports wide range input supply voltages from 14.4 V DC to 154 V DC, and meets all EN 50155 requirements for voltages ranging from 24 V DC to 110 V DC. Conduction Cooled The NM11 Power over Ethernet Switch is designed for fanless operation at temperatures ranging from -40 °C to +70 °C, with up to +85 °C for 10 minutes. The NM11 features IP40 protection when surface-mounted and cooling fins which serve as a heat sink for the internal electronics, and in this way provides conduction cooling. Familiar Family Concept As a member of MEN's family of extremely rugged industrial network boxes, the NM11 provides the same flexibility and scalability, as well as a look and feel which is common to the family. Smart managed 8-port rugged Ethernet switch PoE+ Power Sourcing Equipment (PSE), up to 61.6 W output power M12 D-, A- or X-coded connectors 10/100 (Fast) or 10/100/1000 Mbit/s variants Fanless and maintenance-free design Ultra wide range power supply input (14.4 to 154 VDC) with interruption class S2 -40 °C to +70 °C (+85 °C) Compliant to EN 50155 (railways)

NM10 Smart Managed 8-Port Railway Ethernet Switch Rugged Embedded Network Box The NM10 family is a range of fanless, smart managed and maintenance-free Ethernet switches with IP40 protection, specifically designed for use in rolling stock and automotive applications operating in extremely rugged environmental conditions. Maintenance-Free and Extremely Rugged The NM10 family is a range of fanless, smart managed and maintenance-free Ethernet switches, which have been specifically designed for use in rolling stock applications operating in extremely rugged environmental conditions. Versatile Application Possibilities The NM10 range of switches provide eight channels at the front panel, accessible through M12 connectors, covering different application requirements, and either 100 Mb or 1 Gb Ethernet interfaces. Compliant to Railway Standards The voltage supply for the NM10 Ethernet switch is designed for maximum flexibility and supports wide range input supply voltages from 14.4 V DC to 154 V DC, and meets all EN 50155 requirements for voltages ranging from 24 V DC to 110 V DC. Conduction Cooled The NM10 Ethernet Switch is designed for fanless operation at temperatures ranging from -40 °C to +70 °C, with up to +85 °C for 10 minutes. The NM10 features IP40 protection when surface-mounted and cooling fins which serve as a heat sink for the internal electronics, and in this way provides conduction cooling. Familiar Family Concept As a member of MEN's family of extremely rugged industrial network boxes, the NM10 provides the same flexibility and scalability, as well as a look and feel which is common to the family. Smart managed 8-port rugged Ethernet switch M12 D-, A- or X-coded connectors 10/100 (Fast) or 10/100/1000 Mbit/s variants Fanless and maintenance-free design Ultra wide range power supply input (14.4 to 154 VDC) with interruption class S2 -40 °C to +70 °C (+85 °C) Compliant to EN 50155 (railways)

D221 PCI-Express Adapter Card The D221 is a PCIe card providing slots for duagon PC/104 and PC/30 interfaces. This adapter card allows you to access duagon Ethernet, MVB and CAN interface cards through PCIe. In combination with a duagon interface, the D221 can be used for software development, debugging and diagnostics. It is intended for laboratory use only. The D221 comes equipped with two front bezels for single and double slot installation. Furthermore, standoffs are included to easily mount duagon interfaces. The required PCIe driver is also included. All duagon PC/30 interfaces (D015C, D015M, D015E) and all latest duagon PC/104 interfaces (D113, D114RS D134E, D135EC, D135EM, D153E, etc.) are supported. The D221 is compliant to the PCI-Express Revision 1.1 and PC/104 (conformance level "compliant") specifications. The PC/30 serial line is available for FTDI communication. The D221 is designed to be mounted in a computer's PCIe slot and can be used on any type of PCIe connector. Refer to d-019279-nnnnnn "D221 Assembly Instruction" for further information about mounting duagon interfaces. The D221 is not recommended for new designs PCIe Adapter card for software development, debugging and diagnostics Compatible to all PC/30 and PC/104 interface cards from duagon Compliant to any PCIe connector Standardized host interface for fast system integration – the same software interface may be used for all duagon PC/30 and PC/104 interface products Everything included for mounting different duagon interfaces Standard Windows and Linux drivers available

D205E Ethernet Interfaces Development Board The D205E is an evaluation board for the duagon D013E (Ethernet) and the D015 (MVB/Ethernet/CAN) interfaces. It allows full access through serial interface and SPI, without any hardware development. It is intended for laboratory use only. D013E/D015 serial interface with interfacing possibilities (LVTTL, RS232 or RS485) D013E SPI interface Two M12 Ethernet connections with LAN bypassing relays Exposed duagon command line interface (CLI) of the D013E/D015, for example for software updates Exposed JTAG interface of the D013E/D015 Wide power supply input range (5V-15V)

D205 MVB interfaces development board The D205 is an evaluation board for two duagon MVB controllers (D013 and D015). It allows full access to MVB controller through serial interface, without any hardware development. It is intended for laboratory use only. MVB EMD or ESD operation D013/D015 serial interface Wide power supply range (5V to 15V) Flexible interfacing possibilities (LVTTL, RS-232 or RS-485) exposed duagon Command Line Interface of D013/D015– for example for software updates exposed JTAG interface of D013/D015

D413 Dev Kit D413 Development Kit The purpose of the D413 – MVB Software Development Kit – is to support the integration of any duagon MVB Interface into a customer controller platform. The application engineer can start implementation of the MVB application software before the final hardware platform is ready. The D413 offers the same API (Application Programming Interface) as any duagon MVB Interface. An application implemented using the D413 just needs to be linked with the MVB driver software ported to the customer hardware platform. Immediately start MVB application software development The D413 supports both configuration available for any duagon MVB Interface: MDFULL SERVER MVB communication is possible with ESD+ and EMD based networks