F11S Intel Atom CPU Board 3U CompactPCI The F11S single-board computer is a versatile 3U Eurocard CompactPCI board, equipped with an Intel Atom Z510P, Z530P, Z510PT or Z520PT processor. The F11S single-board computer is a versatile 3U Eurocard CompactPCI board, taking 8 HP or more front space depending on its configuration. It is equipped with the Intel Atom XL processor, an IA-32 core based on 45nm process technology. Some processor versions are qualified for the extended temperature range. Due to the low power architecture of the Intel Atom processor, the CPU card has a total power consumption of max. 5 to 7 Watts, while having a clock frequency of up to 1.6 GHz. A specially outlined heat sink efficiently takes away the heat from the board, even in extended temperature range. The F11S is designed especially for systems which require low power consumption, e.g. as a computing platform for rugged industrial PCs in mobile applications or for infotainment applications, offering the whole world of Windows and Linux based software. The F11S accommodates up to 2 GB of directly soldered main memory, 2 MB SRAM and an SPI boot flash. A SATA interface is available at CompactPCI connector J2. The storage capacity is completed by a CompactFlash socket and a microSD card slot. One Gigabit Ethernet via one PCI Express x1 link from the Intel System Controller Hub US15WP and one FPGA-controlled Fast Ethernet via RJ45 connectors are available at the front. Further standard front I/O interfaces are one COM via a D-Sub connector, two USB 2.0, graphics (VGA up to UXGA) and keyboard/mouse. An on-board FPGA allows implementation of additional functionality such as serial interfaces, CAN bus controllers, binary I/O, protocol converters, touch controllers etc. to the needs of the individual application in a very flexible way. Before boot-up of the system, the FPGA is loaded from the boot Flash. Updates of the FPGA contents can be made inside the boot Flash during operation and are available after a power-off of the system. A maximum of 3 SA-Adapters can be realized on one F11S, with I/O accessible at the front panel. The F11S is completed by a board management controller for temperature and power supervision. It comes with a Phoenix Award BIOS configurable for the final application. The F11S is designed for operation in a -40°C to +85°C conduction or convection cooled environment. 32-bit 8HP CompactPCI system slot Intel Atom Z510P, Z530P, Z510PT, Z520PT Up to 2 GB DDR2 SDRAM 2 MB SRAM CompactFlash microSD slot 1 SATA interface via rear I/O VGA, 2 USB, PS/2, 1 UART 1 Gigabit and 1 Fast Ethernet FPGA for individual user I/O at rear -40°C to +85°C

F216 High-Speed Octal UART Interface Board 3U CompactPCI The F216 is an octal UART I/O board based on 3U CompactPCI. Two UART controllers provide four full-duplex serial channels each. The F216 is an octal UART I/O board based on 3U CompactPCI. Two UART controllers provide four full-duplex serial channels each. The physical layers are integrated on the board: each of the eight channels can be individually configured as single-ended RS232 or differential RS422 or RS485. The default setting is RS422. The UART controller supports high data rates up to 921 600 bit/s, depending on the physical interface type. Its register set is fully 16550D compatible, even with larger, 60-byte FIFOs. Each channel of the F216 has its own 500V isolation, with all ports being available on one 78-pin D-Sub connector. An adapter cable is also available to spread the 78-pin connector to eight standard 9-pin D-Sub connectors. The F216 is designed for use in rugged environments. For example, all components are specified for an operating temperature of -40°C to +85°C. The card easily expands CompactPCI systems by an additional eight UARTs on 4 HP where the CPU does not provide enough COM interfaces. Octal 16550 UART RS232/422/485, isolated Large receive and transmit FIFOs Very high data rates up to 921 600 bit/s Full handshake support Hardware flow control for RS485 half duplex -40°C to +85°C with qualified components

NM50 IOT & Gateway Computer or WLAN Access Point Rugged Embedded Railway & Automotive Network Box The NM50 is a fanless and maintenance-free mobile wireless access point with IP30 protection designed for use in rolling stock and automotive applications and harsh environmental conditions. Maintenance Free and Extremely Rugged The NM50 is a fanless and maintenance-free wireless access point, specifically designed for use in railway cars operating in rugged environmental conditions. High Speed Internet for Multiple WLAN Devices The NM50 Access Point can support up to two WLAN modules, and provides reliable high speed internet and local data connection to multiple WLAN compatible devices. A configurable firewall protects WLAN clients and supports secure and uninterrupted internet data access. High Performance Processor in a Conduction Cooled System The NM50 Access Point is based on QorIQ Power PC CPU technology from NXP. The system is designed for fanless operation in temperatures ranging from -40 to +70°C (+85°C for up to 10 minutes). Its special aluminium housing with cooling fins serves as a heatsink for the internal electronics, and in this way provides conduction cooling. Extended Coverage and Increased Service Availability A redundant upstream connection to a local server, or downstream to other access points, to extend coverage and increase availability of service, is achieved via the two Gigabit Ethernet ports available on 8-pin M12 connectors. Wide Range Power Input and Compliant to Railway Standards The voltage supply for the fully configured NM50 Access Point is designed for maximum flexibility and supports wide range input supply voltages from 14.4 to 154 VDC, and meets all EN 50155 requirements for voltages ranging from 24 to 110 VDC. Adaptable to Specific Application Needs The NM50 comes in two standard versions and can be adapted to meet specification application needs. Some of the most important configuration options include the number of WLAN radios and type of upstream link. NXP PowerPC QorIQ P1013, 800 MHz Fanless and maintenance-free design 2 Gigabit Ethernet ports on M12 connectors 1 USB 2.0 Type A port, 1 USB 2.0 Type B port Up to 6 antennas on RP-TNC connectors Wireless LAN according to IEEE802.11b/g/n Aluminum housing with IP30 protection -40°C to +85°C operating temperature Dual RF, simultaneous 2.4 GHz and 5 GHz band support Ultra wide range power supply input, with interruption class S2 Electrically isolated Compliant to EN 50155 (railways)

XM1L ESMexpress COM with Intel Atom XL Series Computer-On-Module The XM1L is a rugged Computer-On-Module of the ESMexpress family equipped with an Intel Atom XL processor (Z510P, Z530P, Z510PT, Z520PT). The XM1L is a Computer-On-Module of the ESMexpress family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM1L is controlled by the Intel Atom XL processor, an IA-32 core based on 45nm process technology which is qualified for the industrial temperature range. Due to the power architecture of the Intel Atom CPU, the XM1L has a total power consumption of max. 5 to 7 Watts, while having a clock frequency of up to 1.6 GHz. The XM1L accommodates up to 2 GB of directly soldered main memory and supports other memory like USB Flash on the carrier board. Interfaces from the Intel System Controller Hub US15WP are optimized using exclusively modern serial standards and are all routed from the XM1L for availability on any ESMexpress carrier board. Depending on the version of XM1L, those interfaces include a combination of PCI Express links, LVDS, SDVO, high-definition audio, SATA, Ethernet with wake-on-LAN functionality, and USB. Additional COM interfaces can be made available on the carrier board via USB to COM conversion. The XM1L is completed by a board management controller for temperature and power supervision. It comes with a Phoenix Award BIOS configurable for the final application. The XM1L is screened or qualified for operation from -50°C to +85°C (Tcase). As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operation temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processorand airflow. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95x125mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. Intel Atom Z510P, Z530P, Z510PT, Z520PT Up to 2 GB DDR2 SDRAM Up to 2 PCI Express Up to 1 Gb Ethernet 1 SATA port 8 USB 2.0 SDVO, LVDS Intel HD Audio -50°C to +85°C Tcase screened or qualified Conduction cooling

PX1 GLONASS & GPS Interface PCI Express Mini Card The PX1 is a PCI Express Mini Card providing a GNSS receiver with GLONASS and GPS functionality. The PX1 is a PCI Express Mini Card providing a GNSS receiver with GLONASS and GPS functionality. It supports active or passive antennas, which can be connected to an U.FL connector. The received antenna signals are sent to the host via USB. GLONASS isthe Russian alternative to GPS and has comparable coverage and precision. The PX1 is prepared to support the European Union's global navigation satellite system Galileo and the Chinese navigation satellite system Compass. The GNSS module provides a gyroscope sensor for dead reckoning functions, which enable accurate positioning. Various Satellite-Based Augmentation Systems (SBAS) are also supported. The PX1 provides communication information compliant to the NMEA 0183 protocol. Multi GNSS support Active Dead Reckoning (DR) Satellite Based Augmentation System (SBAS) -161 dBm tracking sensitivity Active/passive antenna connection via U.FL Compatible with NMEA 0183 -40..+85°C with qualified components Prepared for conformal coating

SA25 GPS Receiver Interface Adapter SA-Adapter The SA25 is a GPS receiver interface adapter which supports L1 frequency, C/A code and SPS. The SA25 provides a GPS receiver interface which supports L1 frequency, C/A code and SPS. An external active or passive antenna can be connected to a rugged SMA connector at the front panel. The received GPS signals are sent to the host via a 5V TTL COM port with a data transfer rate of 4800 baud (configurable). SA-Adapters are small universal boards providing the line drivers for legacy serial I/O, fieldbus interfaces and other small I/O functions. One serial line is provided per adapter, which can be plugged directly to the CPU board as a mezzanine. Alternatively, the adapter can be connected to the front panel via ribbon cable. The SA concept allows to add additional I/O interfaces to many of duagon's CPU boards, enhancing flexibility with regard to the line transceivers and isolation requirements. Whether a specific SA-Adapter (or a mix of different SA-Adapters) fits on a specific CPU board is determined by a combination of mechanical, performance, FPGA and operating system criteria and needs to be verified for every board configuration requested. 48-channel GPS receiver GPS according to NMEA 0183 L1 frequency, C/A code, SPS Rugged SMA connector Optical isolation -40 °C to +85 °C

A17 Embedded Single Board Computer with PowerPC MPC8548 6U VME64 The A17 is a PowerPC based embedded computer for industrial automation. The VME 2eSST master SBC features an MPC8548 or MPC8543 processor and M-Module mezzanine slots. The A17 is an advanced PowerPC based single-board computer for embedded applications and can act as a master or a slave in a legacy VMEbus environment. Using the TSI148 bridge controller the CPU card provides 2eSST performance levels while maintaining backwards compatibility with older standards such as VME64 and VME32. The 2eSST protocol is based on synchronous data transfer and thus doubles the theoretical VME transaction bandwidth to transfer rates of up to 320 MB/s. The A17 is controlled by an MPC8548, or optionally an MPC8543 PowerPC processor (alternatively with encryption unit) with clock frequencies between 800 MHz and 1.5 GHz. The SBC is equipped with ECC-controlled DDR2 RAM for data storage, with a Flash disk for program storage as well as with non-volatile FRAM. The board provides front-panel access for two Gigabit Ethernet and two COM interfaces via four RJ45 connectors. Another two Gigabit Ethernet channels are available at the optional P0 rear connector to support Ethernet on the backplane complying with ANSI/VITA 31.1-2003. The two PMC slots on the A17 support PMC modules working with 32-bit/33-MHz up to 64-bit/66-MHz. One of the mezzanine slots supports rear I/O and can also be used for XMC modules with a PCI Express x1, x2, or x4 link.The second (PMC only) slot is connected to the onboard FPGA and can thus act as the physical layer for additional functions implemented in the FPGA. The PMC/XMC slots allow flexible extension to the A17, adding functions such as graphics, mass storage, further Ethernet, or a simple FPGA-backed physical layer. Even more I/O functions such as graphics, touch, CAN, binary I/O etc. can be realized as IP cores in FPGA for the needs of the individual application. The A17 comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. PowerPC MPC8548 (or MPC8543), up to 1.5 GHz 1-slot 2eSST VMEbus master and slave Up to 2 GB (ECC) DDR2 RAM Flash Disk, FRAM 2 Gb Ethernet, 2 COMs at front 2 Gb Ethernet via P0 2 PMC slots (1 slot also XMC) FPGA for individual I/O functions MENMON BIOS for PowerPC cards -40 to +85°C screened

XM51 ESMexpress COM with QorIQ P4080 Computer-On-Module The XM51 is a rugged Computer-On-Module (COM) of the ESMexpress family featuring a QorIQ P4080, P4040 or P3041 CPU. It is designed for avionics, industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The XM51 supports conductive cooling technology and is 100% EMC proof. The XM51 is a multi-core computer-on-module based on the NXP (formerly Freescale) PowerPC QorIQ family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM51 is built around a QorIQ P4080, P4040 or P3041 running at frequencies between 1.2 and 1.5 GHz. All types have multi-core performance and advanced processing functions (incl. encryption), but the XM51 is still scalable to individual needs. The eight-core P4080 isa high-end number cruncher, while the P3041 aims at power and cost efficiency. The entire board draws a maximum power of 32 W and supports extended operating temperatures in all configurations. The COM has up to 16 GB of soldered ECC main memory driven by two independent controllers. The two RAM banks can be assigned to processor cores to avoid access conflicts and assure deterministic behavior. This facilitates building up certifiable solutions for safety-critical avionics or railway applications. Up to 512 KB industrial, non-volatile FRAM and 256 MB Flash round out the XM51's onboard memory. Further capacity can be added on the carrier board as needed via high-speed serial busses, i.e. USB or SATA. All interfaces routed from the QorIQ processor are available on any ESMexpress carrier board. Those include four USB 2.0 host ports and one USB client realized using a UART-to-USB converter, two Gigabit Ethernet channels, dual 3-Gbit SATA, and two PCI Express x1 links. The latter support PCIe 2.x with datarates of 5 Gbit/s per lane. The XM51 is qualified for operation in a -50°C to +85°C conduction or convection cooled environment. As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95 x 125 mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. NXP QorIQ P4080, P4040 or P3041 Power Architecture e500mc CPU Up to 8 cores, up to 1.5 GHz Up to 16 GB ECC DDR3 SDRAM, 1 or 2 controllers Up to 128 KB FRAM, up to 256 MB Flash 2 Gb Ethernet, 4 USB 2.0, 1 USB client 2 SATA (3 Gbit/s), 2 PCIe x1 (5 Gbit/s) U-Boot Universal Boot Loader -50°C to +85°C Tcase with qualified components Conduction cooling

F19P Intel Core 2 Duo CPU Board 3U CompactPCI PlusIO The F19P versatile 4HP/3U single-board computer is compatible to the CompactPCI PlusIO standard and equipped with the Intel Core 2 Duo processor SP9300. The F19P versatile 4HP/3U single-board computer is a continuation of duagon's proven range of Intel CPU boards. It is equipped with the Intel Core 2 Duo processor SP9300 running at 2.26 GHz and offering multi-core processor architecture from Intel with full64-bit support. The CPU card delivers an excellent graphics performance and is designed especially for embedded systems which require high computing performance with low power consumption. The F19P offers a 32-bit/33-MHz CompactPCI bus interface and canalso be used without a bus system. It offers 4 USB 2.0 and 4 fast (3Gb/s) SATA interfaces as well as 4 PCI Express x1 links and one Gigabit Ethernet on the J2 rear I/O connector which is compatible with the PICMG 2.30 CompactPCI PlusIO specification. A total of seven PCI Express lanes for high-speed communication (such as Gigabit Ethernet) are supported on the F19P. 3 x1 PCIe links are used for the three onboard Ethernet interfaces. 4 x1 PCIe links are available via rear I/O or on a specific side card. The F19P is equipped with a fast DDR3 DRAM which is soldered to the F19P to guarantee optimum shock and vibration resistance. A robust CompactFlash and microSD card device which are connected via a USB interface offer nearly unlimited space for user applications. The standard I/O available at the front panel of F19P includes graphics on a VGA connector, two PCIe-driven Gigabit Ethernet as well as two USB 2.0 ports. The F19P can be extended by different side cards. Additional functions include two digital video interfaces for flat panel connection via DVI (multimedia), a variety of different UARTs or another four USBs, SATA for hard disk connection and HD audio. Thermal supervision of the processor and a watchdog for the operating system complete the functionality of the F19P. The F19P operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The InsydeH2O EFI BIOS was specially designed for embedded system applications. Equipped with Intel components exclusively from the Intel Embedded Line, the F19P has a guaranteed minimum standard availability of 7 years. The F19P is suited for a wide range of industrial applications, e.g. for monitoring, vision and control systems as well as test and measurement. The F19P comes with a tailored passive heat sink within 4 HP height. The robust design of the F19P make the board especially suited for use in rugged environments with regard to shock and vibration according to applicable DIN, EN or IEC industry standards. The F19P is also ready for coating so that it can be used in humid and dusty environments. Intel Core 2 Duo SP9300, 2.26 GHz Dual-core 64-bit processor 32-bit 4HP system master (or stand-alone) For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0) Up to 4 GB DDR3 DRAM soldered CompactFlash and microSD card slots Front I/O: VGA, 2 Gb Ethernet, 2 USB Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc. Board controller -40°C to +85°C screened version

XM50 ESMexpress COM with PowerPC MPC8548 Computer-On-Module The XM50 is a rugged Computer-On-Module (COM) of the ESMexpress family featuring a PowerPC MPC8548 or MPC8543 CPU. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The XM50 supports conductive cooling technology and is 100% EMC proof. The XM50 is a computer-on-module of the ESMexpress family controlled by an integrated PowerPC MPC8548 or MPC8543 CPU processor (optionally with encryption unit) with clock frequencies between 800 MHz and 1.5 GHz. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM50 accommodates up to 2 GB of directly soldered ECC main memory and supports other memory like USB Flash on the carrier board. It also features industrial FRAM and SRAM. Interfaces from the MPC8548 are all routed from the XM50 for availability on any ESMexpress carrier board. Those interfaces include up to three Gigabit Ethernet channels, 8 PCI Express lanes for one link (x4, x2 or x1, or x8as an option), triple SATA, 6 USB host ports and one USB client realized using a UART-to-USB converter. Additional COM interfaces can be made available on the carrier board via USB to COM conversion. The XM50 comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. The XM50 is screened for operation in a -50°C to +85°C conduction or convection cooled environment. As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operating temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95x125mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. MPC8548 (or MPC8543), up to 1.5 GHz Up to 2 GB (ECC) DDR2 SDRAM Up to 128 KB FRAM, 2 MB SRAM 3 (or 2) Gb Ethernet ports 6 USB 2.0, 1 USB client 3 SATA ports 1 PCI Express x4 MENMON BIOS for PowerPC cards -50°C to +85°C Tcase screened Conduction cooling