BL50W Rugged Box PC for Transportation with AMD G-Series Railway & Automotive Embedded Computer for Wireless Connectivity The BL50W is a rugged, fanless EN 50155 railway and E-Mark automotive box computer, based on an AMD dual-core T48N. It is used as railway communication and management computer, and - thanks to its built-in multitude of wireless interfaces - as passenger information and internet access system for public transportation. The BL50W is a fanless, maintenance-free box computer that has been designed for independent use or as display computer electronics for embedded wireless applications in transportation, e.g. in trains, commercial vehicles, mobile machines or airplanes. Four PCI Express Mini Card slots each with dual SIM make it possible to flexibly implement the whole range of wireless interfaces such as mobile service standards GSM (2G), UMTS (3G), LTE (4G) and derivates and wireless communication standards WLAN / Wi-Fi IEEE 802.11 and derivates. A GNSS interface supporting positioning systems GPS and GLONASS complements the possibilities. The rugged BL50W is powered by a dual-core AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The G-Series combines low-power CPUs and advanced GPUs, in this case an AMD Radeon HD 6310, into a single embedded device. The use of the Embedded G-Series makes for high scalability in CPU (single/dual core) and graphics performance (various Radeon GPUs or none at all). The BL50W is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. A SATA hard-disk/solid-state drive can be installed within the housing as an option. The system is designed for fanless operation at temperatures from -40 °C to +70 °C (+85 °C for up to 10 minutes), its special aluminum housing with cooling fins serves as a heatsink for the internal electronics and in this way provides conduction cooling. The BL50W supports up to two DisplayPort interfaces with full HDresolution. In addition, a multitude of other I/O is available at the front panel, including two Gigabit Ethernet, two USB 2.0, variable slots for legacy serial I/O (e.g. RS232) or CAN bus, general purpose inputs and relay outputs. The BL50W comes with its own integrated 30W 24 VDC nom. class S2 wide-range power supply and is in compliance with EN 50155 and ISO 7637-2 (E-mark for automotive). The power can be switched on and off using an ignition signal on the power connector, and a run-down time after switching off the ignition signal can be adjusted by software. The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makesfor an extremely flexible system design that can quickly be tailored to a vast number of applications. AMD Embedded G-Series APU 4 PCI Express Mini Card slots each with dual SIM for GSM (2G), UMTS (3G), LTE (4G), WLAN, 9 antenna cut-outs GPS/GLONASS interface 2 Gigabit Ethernet, 2 USB 2.0, 2 DisplayPorts 1 RS232, 1 RS422/485 3 flexible slots for IBIS, RS232, RS422/485 or CAN 24 VDC and 36 VDC nom. class S2 power supply, incl. ignition -40 °C to +70 °C (+85 °C), fanless Compliant to EN 50155 (railways) Compliant to ISO 7637-2 (E-mark for automotive)

BC50M Rugged Box PC for Transportation with AMD G-Series Railway & Automotive Embedded Computer for Communication & Control The BC50M is a rugged, fanless EN 50155 railway and E-Mark automotive box computer for board computer and graphics display applications, based on an AMD dual-core T48N. The BC50M is a maintenance-free box computer which has been designed for independent use or as display computer electronics for use in vehicles, e.g. in trains, commercial vehicles, mobile machines or airplanes. It is powered by an AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The G-Series combines low-power CPUs and advanced GPUs, in this case an AMD Radeon HD 6310, into a single embedded device. The use of the Embedded G-Series makes for high scalability in CPU (single/dual core) and graphics performance (various Radeon GPUs or none at all). The BC50M is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. A SATA hard-disk/solid-state drive can be installed within the housing as an option. Fanless Operation for Mobile Applications The system is designed for fanless operation at temperatures from -40 °C to +70 °C (+85 °C for up to 10 minutes), its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. Wireless Communication On the inside, the system offers two PCI Express Mini card slots with two SIM card slots. By default, one is used for each of the two PCI Express Mini cards, but the first PCI Express Mini card can also switch between the two SIM cards as an option. The necessary antenna connectors can be made available at the front panel. Railway-Compliant PSU with Ignition Function The BC50M comes with an integrated 30W wide-range DC/DC converter and is compliant with EN 50155 (nominal input voltages 24 and 36 V) as well as with ISO 7637-2 (E-mark for automotive) (nominal input voltages 12 V and 24 V). The power can be switched on and off using an ignition signal on the power connector, and a shutdown-delay time after switching off the ignition signal can be adjusted by software. Flexible System Design The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. The BC50M supports up to two DisplayPort interfaces with a maximum resolution of 2560x1600 each. The DisplayPort interfaces and all other I/O are available at the unit's front panel on standard connectors like USB, 9-pin D-Sub (HD audio and optional serial I/O), 8-pin M12 (Gigabit Ethernet) and DisplayPort. AMD Embedded G-Series APU 2 DisplayPorts, up to 2560x1600 each 2 Gigabit Ethernet, 1 USB 2.0 WLAN, GSM (2G), UMTS (3G), LTE (4G), GPS or GLONASS via 2 PCI Express Mini Card slots 2 Slots for IBIS, GPS, RS232, RS485, RS422 24 VDC and 36 VDC nom. class S2 power supply, incl. ignition -40 °C to +70 °C (+85 °C), fanless Compliant to EN 50155 (railways) Compliant to ISO 7637-2 (E-mark for automotive)

BC50I Rugged Box PC for Industrial Automation with AMD G-Series Embedded Computer for Machine Control & Robotics The BC50I is a rugged, fanless, embedded PC with a wireless communication focus providing WLAN, 4G-LTE and GPS/GLONASS interfaces, based on an AMD dual-core T48N. The BC50I is a fanless, maintenance-free box computer that has been designed for independent use or as display computer electronics for use in industrial applications, e.g. for machine control, surveillance or commercial vehicles or robotics. It is powered by an AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The G-Series combines low-power CPUs and advanced GPUs, in this case an AMD Radeon HD 6310, into a single embedded device. The use of the EmbeddedG-Series makes for high scalability in CPU (single/dual core) and graphics performance (various Radeon GPUs or none at all). The BC50I is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. A SATA hard-disk/solid-state drive can be installed within the housing as an option. The system is designed for fanless operation at temperatures from -40 to +70°C, its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. The BC50I supports up to two DisplayPort interfaces with a maximum resolution of 2560x1600 each. The DisplayPort interfaces and all other I/O are available at the unit's front panel on standard connectors like USB, 9-pin D-Sub (optional serial I/O), RJ45 (Gigabit Ethernet) and DisplayPort. On the inside, the system offers one PCI Express Mini card slot with a SIM card slot. The necessary antenna connectors can be made available at the front panel. The BC50I comes with its own integrated 24 VDC nom. (16 to 36 V) power supply. The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. AMD Embedded G-Series Dual-Core APU 2 Gigabit Ethernet 2 USB 2.0 2 DisplayPort outputs, full HD with each display WLAN, GSM (2G), UMTS (3G), LTE (4G), GPS or GLONASS via 1 PCI Express Mini Card slot 2 Slots for IBIS, GPS, RS232, RS485, RS422 1 CAN Bus interface optional 24 VDC nom. (16 to 36 V) -40 to +70°C operating temperature, fanless

BC50F Rugged Box PC for Industrial Automation with AMD G-Series Embedded Computer for Real-time Ethernet & Fieldbus Applications The BC50F is a rugged, fanless, embedded PC for remote control and communication via EtherCat, Ethernet POWERLINK, PROFINET, Modbus, sercos, VARAN or CAN bus based on an AMD dual-core T48N. The BC50F is a fanless, maintenance-free box computer that has been designed for real-time Ethernet applications in industrial environments, e.g. for machine control, robotics or vehicles. It offers two real-time Ethernet interfaces implemented using a Hilscher PCI Express Mini Card. It is powered by an AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The G-Series combines low-power CPUs and advanced GPUs, in this case an AMD Radeon HD 6310, into a single embedded device. The use of the Embedded G-Series makes for high scalability in CPU (single/dual core) and graphics performance (various Radeon GPUs or none at all). The BC50F is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. The system is designed for fanless operation at temperatures from 0 to +60°C, its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling. The BC50F supports up to two DisplayPort interfaces with a maximum resolution of 2560x1600 each. The DisplayPort interfaces and all other I/O are available at the unit's front panel on standard connectors like USB, 9-pin D-Sub (optional serial I/O), RJ45 (Gigabit Ethernet) and DisplayPort. The BC50F comes with its own integrated 24 VDC nom. (16 to 36 V) power supply. The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications. AMD Embedded G-Series Dual-Core APU 2 Real-Time Ethernet (e.g. PROFINET, EtherCAT) 2 Gigabit Ethernet 2 USB 2.0 2 DisplayPort, full HD with each display 1 Slot for RS232, RS485, RS422, CAN, GPS, IBIS 24 VDC nom. (16 to 36 V) 0 to +60°C operating temperature, fanless

M199 M-Module USM FPGA Development Kit USM Universal Submodules make M-Modules more flexible, cost and time-saving than ever. A main M-Module gets its specific function through the IP cores implemented inside its onboard FPGA. USM Universal Submodules make M-Modules more flexible, cost and time-saving than ever. A main M-Module gets its specific function through the IP cores implemented inside its onboard FPGA. This function can be changed at any time through implementation ofdifferent IP cores. The corresponding line drivers are realized on a USM which is simply plugged on the main M-Module. This FPGA USM development kit for M-Modules has been prepared for users who like to write and/or implement specific IP cores on their own. Even the growing range of Wishbone-based standard IP cores from duagon (different UARTs, Ethernet, fieldbus interfaces, graphics, digital I/O etc.) can be combined with your own or third-party functions. The kit includes the main M-Module M199 equipped with an FPGA, 32 MB DDR2 SDRAM, 8 MB Flash and a 50-pin SCSI connector. In addition the package includes a bare USM module, a test board where I/O signals from the FPGA are led to and where an additional debug interface is implemented, and a SCSI cable for connection between the main M-Module and test board. The Nios processor, memory control, and the Avalon/Wishbone bridges are installed on the main module. The corresponding FPGA development package is available as web download. For development of IP cores on the standard Wishbone bus the Wishbone Bus Maker tool from duagon is included. In order to use the Nios cores and to develop IP cores on the Avalon bus Altera's Quartus II design environment including the SOPC builder is needed separately. ANSI standard mezzanine M-Modules can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. Once a USM module has been developed for M-Modules, it may also be used on PMC or XMC and conduction-cooled PMC base modules, and vice versa. 1 Main M-Module M199 for USM Universal Submodules: 1 FPGA 33,216 LE 32 MB DDR2 SDRAM, 8 MB Flash 1 bare USM module US0 1 evaluation board with RS232 debug interface 1 FPGA development package: Main bus interface Memory control Nios softcore Wishbone/Avalon bridges For user-defined I/O 1 SCSI cable -40 to +85 °C with qualified components

G212 Wireless Network Board for 2 PCIe and 2 SIM Cards 3U CompactPCI Serial The G212 is a rugged single Eurocard CompactPCI Serial carrier board supporting the PCI Express Mini Card standard or the ExpressCard standard for implementing WLAN, UMTS, GPS, GSM or HSDPA interfaces. The G212 is a rugged single Eurocard CompactPCI Serial carrier board supporting the PCI Express Mini Card standard or, as an option, the ExpressCard standard. ExpressCard is the successor of the CardBus standard and offers different construction sizes aswell as connection via PCI Express or USB 2.0. The standard version of the G212 offers two PCI Express Mini Card slots. It allows to use all types of cards for HF applications, for example GPS, WLAN, UMTS, GSM, or HSDPA. Each card is connected to two robust redundant external SMA antenna connectors at the front panel of the G212. Using these standard cards that give access to the whole world of common notebook PC expansions is a fast and easy way to extend the functionality of a CompactPCI Serial system as well. The G212 is designed for -40°C to +85°C operating temperature and prepared for conformal coating in order to be used also in harsh and mobile environments. The final environmental qualification depends on the respective cards used on the carrier. Up to 2 PCI Express Mini Cards (full-size) ExpressCard/34 or 54 modules optional For cards with internal PCIe and USB interface For HF applications (WLAN, UMTS, GPS, GSM, HSDPA) -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card

M51 Mezzanine Card with 4 CAN Bus Interfaces M-Module The M51 is an M-Module that supports 4 SJA1000 CAN controllers with 2.0 Basic and Extended CAN. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M51 is a CAN bus interface M-Module based on the SJA1000. It is available with one or four CAN bus controllers. The M-Module is equally suitable in fieldbus applications and for test and diagnosis equipment for the CAN bus or CAN bus devices. All channels are optically isolated from the system and from each other. The four-channel version has been designed for example for use of SLIO CAN devices (serial linked I/O) to increase the I/O capabilities of your system in a very cost-effective way. The M51 also supports network configurations that require high speed with short distances and low speed over long distances. The M51 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 4 SJA1000 CAN controllers 2.0B Basic CAN/Extended CAN ISO high-speed coupling Optical isolation CAN Layer 2 support -40 °C to +85 °C versions Not conforming to RoHS

F606 Side Card Gb Ethernet 3U CompactPCI The F606 is a 4HP dual Gigabit Ethernet extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards. The F606 is a 4HP dual Gigabit Ethernet extension card for 3U Intel based CompactPCI single-board computers. It can be used in combination with the F14 and compatible CPU boards. Equipped with rugged Lemo connectors the F606 makes Gigabit Ethernet connectivity available for applications in railways and other harsh and mobile environments. An individually configurable UART is accessible via D-Sub connector. Consequently, this side card is screened for -40°C to +85°C operation temperature and comes with conformal coating. The F606 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel. Options of the F606 allow to replace the Lemo by D-Sub connectors and may provide up to two UART channels on the front and up to two USB ports via rear I/O. 4 HP extension for 3U Intel SBCs F14, F15, F17, F18, F19P, F21P 2 Gigabit Ethernet on Lemo railway compliant connectors 1 COM extension (SA-Adapter) Conformal coating 2.5" SATA hard disk slot -40°C to +85°C screened

F602 CompactPCI Express Side Card 3U CompactPCI The F602 is a 4HP CompactPCI Express extension card for 3U Intel-based CompactPCI single-board computers. It can be used in combination with the F14, F15, F17 and F18 CPU boards. The F602 is a 4HP CompactPCI Express extension card for 3U Intel-based CompactPCI single-board computers. It can be used in combination with the F14, F15, F17 and F18 CPU boards. That way, these CPU boards can be used both as system-slot cards in a CompactPCI environment and as system-slot cards on a CompactPCI Express backplane. The F602 supports 4 PCI Express links with 1 lane each to the backplane via its XJ2 and XJ3 connectors. In a standard 8-slot hybrid backplane from Schroff the CompactPCI Express single-board computer sits in the middle, with the possibility to plug another three legacy CompactPCI cards to the left and three CompactPCI Express cards to the right. In addition to the CompactPCI Express functionality the F602 provides one USB 2.0,one COM (RS232, RS422/485, with or without optical isolation via SA-Adapter) and one DVI port at its front panel. On top of that an onboard 2.5" SATA hard-disk slot is available on the F602. The F602 is directly plugged to the right side of the respective single-board computer. A robust connector makes for high mechanical stability. It is delivered with an 8HP front panel, replacing the 4HP front panel of a 3U single-board computer and thus resulting in a solid one-piece front panel. 4 HP extension for 3U Intel SBCs F14, F15, F17, F18 4 PCI Express links x1 to backplane 1 COM via SA-Adapter 1 USB 2.0 1 DVI connection 2.5" SATA hard-disk slot

F212 Wireless Network Board for 2 PCIe and 2 SIM Cards 3U CompactPCI The F212 is a rugged single Eurocard CompactPCI carrier board supporting the PCI Express Mini Card standard or the ExpressCard standard for implementing WLAN, UMTS, GPS, GSM, HSDPA interfaces. The F212 is a rugged single Eurocard CompactPCI carrier board supporting the PCI Express Mini Card standard or, as an option, the ExpressCard standard. ExpressCard is the successor of the CardBus standard and offers different construction sizes as well as connection via PCI Express or USB 2.0. The standard version of the F212 offers two PCI Express Mini Card slots with USB connection. It allows to use all types of cards for HF applications, for example GPS, WLAN, UMTS, GSM, or HSDPA. Each card is connected to two robust redundant external SMA antenna connectors at the front panel of the F212. Using these standard cards that give access to the whole world of common notebook PC expansions is a fast and easy way to extend the functionality of a CompactPCI system as well. The F212 is designed for -40°C to +85°C operation temperature using qualified components and prepared for conformal coating in order to be used also in harsh and mobile environments. The final environmental qualification depends on the respective cards used on the carrier. 4 HP 32-bit/33-MHz CompactPCI Up to 2 PCI Express Mini Cards ExpressCard/34 or 54 modules optional For cards with internal USB interface For HF applications (WLAN, UMTS, GPS, GSM, HSDPA) -40 °C to +85 °C