F207 PCI-104 Carrier Board for 4 PCI-104 COMs 3U CompactPCI The F207 is a 3U CompactPCI bus card which provides a PCI-104 interface supporting a stack of up to four PCI-104 extension boards. The F207 is a 3U CompactPCI bus card which provides a PCI-104 interface supporting up to four PCI-104 extension boards. An on-board PCI-to-PCI bridge provides a 32-bit PCI interface at the PCI-104 connector and a 32-bit/33-MHz interface to the CompactPCIbus. V(I/O) voltage is 3.3V on the local bus (5V on request) and 3.3V or 5V on CompactPCI. Two different versions of the F207 offer two different connector positions where a PCI-104 module can be placed. The standard version supports the typical stacking method of PCI-104 devices and needs more than one slot of space in a CompactPCI system. Another version allows face-to-face assembly. The F207 is fully compliant with railway standard EN 50155. For example, all components are specified for an operation temperature of -40°C to +85°C. 1 PCI-104 slot For stacking of up to 4 PCI-104 modules 8 HP CompactPCI with one PCI-104 module PCI-to-PCI bridge -40 °C to +85 °C

D203 M-Module Carrier Board for 4 Mezzanine Cards 6U CompactPCI The D203 is a 6U M-Module carrier board for universal I/O on the CompactPCI bus. The D203 is a 6U M-Module carrier board for universal I/O on the CompactPCI bus. It allows high flexibility in applications such as data acquisition or process control. You can install up to four M-Modules on the D203, which needs only one slot on the CompactPCI bus. All M-Modules are screwed tightly on the board and require no separately mounted transition panel. The D203 offers developers immediate access to more than 70 different M-Modules for I/O in fields such as process I/O, measurement, instrumentation, motion control, communication, and development. Long-Term Availability Long-term availability ensures an extended product life and future-safety. 1 CompactPCI bus slot 4 M-Module slots -40 °C to +85 °C

ND30 Ethernet Switch Configuration Dongle For Switches with Firmware 14ETSW-02 (Gen 2) from Rev. 01.03.00 Ethernet switch configuration dongle for fully managed Ethernet switches with firmware 14ETSW-02 (Gen 2) from revision 01.03.00. The ND30 is a configuration dongle for fully managed Ethernet switches with M12 A- coded configuration interface and 14ETSW-02 (Gen 2) firmware from revision 01.03.00. Data Security The switch dongle provides data security through encrypted storage of the switch configuration. After pairing of the dongle and the switch, the configuration interchange and communication itself is secured by an encrypted protocol. Easy Usage The ND30 provides easy usage when exchanging an Ethernet switch. For the dongle no additional power supply voltage is needed. After connecting the device to the switch, the stored configuration is loaded automatically when booting the switch. Maintenance Free and Rugged The ND30 is designed for fanless operation at temperatures ranging from -40 °C to +70 °C (10 min @ +85 °C). It is maintenance-free and designed for use in rolling stock applications. Its cable-less design with all components soldered makes the configuration dongle reliable and robust. The long-term availability of the device minimizes lifecyle management. M12 A-coded 5-pin plug connector Encrypted storage of switch configuration Backup for switch/dongle combination No additional power input necessary Maintenance free -40°C to +70°C (+85°C), fanless EN 50155 compliant (railways)

GP2 4-Port Gigabit SFP PHY Line Card 3U CompactPCI Serial The GP2 is a 3U Gigabit Ethernet PHY line card implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on SFP cages. The GP2 is a 3U Gigabit Ethernet PHY line card implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on SFP cages. The GP2 is designed to work in combination with the G101 CompactPCI Serial managed industrial Ethernet switch. The GP2 provides four cages for 100BASE-FX, 1000BASE-SX, 1000BASE-LX and 1000BASE-ZX SFP modules. Each interface supports a data transfer rate of 1 Gbit/s max, and provides two LEDs to indicate the link and activity status. The GP2 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating. 100/1000 Mbit/s SFP modules supported FX / SX / LX / ZX modules supported 4 SFP cages LEDs for link and activity status -40 to +85°C with qualified components EN 50155 classTx (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)

GP1 4-Port Gigabit Ethernet PHY Line Card with PoE 3U CompactPCI Serial The GP1 is a 3U Gigabit Ethernet PHY line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GP1 can be supplied with four M12 connectors on the front panel (X-coded variants in preparation). The GP1 is a 3U Gigabit Ethernet PHY line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GP1 can be supplied with four M12 A-coded connectors on the front panel (X-coded variants in preparation). The GP1 is designed to work in combination with the G101 CompactPCI Serial managed industrial Ethernet switch. The GP1 features four connectors on the front panel, which can be used to create 4 ports of copper Gigabit Ethernet. In addition, the card can act as Power over Ethernet (PoE) Power Sourcing Equipment (PSE), supplying other devices on all ports with power. Each interface supports a data transfer rate of 1 Gbit/s, and provides two LEDs to indicate the link and activity status. The GP1 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating. 4 Gigabit Ethernet on RJ45 connectors (M12 optional) Power over Ethernet (PoE+) PSE (all ports) LEDs for link and activity status -40 to +85°C with qualified components EN 50155 classTx (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance) IEEE 1588v2 support (optional)

GP3 4-Port Gigabit Copper Ethernet Line Card with PoE 3U CompactPCI Serial The GP3 is a 3U Gigabit Ethernet PHY line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on M12 X-coded connectors. Alternatively, the GP3 can be supplied with four RJ45 connectors on the front panel. The GP3 is a 3U Gigabit Ethernet PHY line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on M12 X-coded connectors. Alternatively, the GP3 can be supplied with four RJ45 connectors on the front panel. The GP3 is designed to work in combination with the G101 CompactPCI Serial managed industrial Ethernet switch. The GP3 features four connectors on the front panel, which can be used to create 4 ports of copper Gigabit Ethernet. In addition, the card can act as Power over Ethernet (PoE) Power Sourcing Equipment (PSE), supplying other devices on all ports with power. Each interface supports a data transfer rate of 1 Gbit/s, and provides two LEDs to indicate the link and activity status. The GP3 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating. 4 Gigabit Ethernet on M12 X-coded connectors Power over Ethernet (PoE+) PSE (all ports) LEDs for link and activity status -40 to +85°C (screened) EN 50155 classTx (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance) IEEE 1588v2 support (optional)

G23 Embedded Single Board Computer with Intel Core i3 / i5 / i7 3U CompactPCI Serial The G23 is an x86 PC based embedded computer for industrial automation and railway transportation, featuring the 4th generation Haswell Intel Core family up to the i7-4700EQ processor. The SBC is perfectly suited for data-intensive applications which require high computing-power. The G23 is a versatile 4HP/3U single-board computer supporting a multitude of modern serial interfaces according to the CompactPCI Serial standard. It is thus perfectly suited for data-intensive applications which require high computing-power. The CPU card is equipped with the Intel fourth-generation Core i7 processor running at up to 3.4 GHz maximum turbo frequency and offering the latest multi-core processor architecture from Intel with full 64-bit support. The processor frequency can be stepped down via the BIOS to lower power consumption and make the board more suitable for high temperatures. The G23 supports the Intel Active Management technology which makes it possible to access the board via the network even when it is in soft-off or standby state. For system security, a Trusted Platform Module is assembled on the board. The memory configuration of the G23 includes a state-of-the-art fast DDR3 DRAM which is soldered to the board to guarantee optimum shock and vibration resistance. An mSATA disk connected via a SATA channel and a microSD card device which is connected via a USB interface offer nearly unlimited space for user applications. The board delivers an excellent graphics performance. Two DisplayPort interfaces are accessible at the board front. Using an external adapter two HDMI or two DVI ports can also be realized. In addition the standard front I/O comprises two PCIe-driven Gigabit Ethernet and two USB 3.2 Gen 1x1 ports. Serial interfaces at the rear I/O connectors are 6 USB 2.0, 2 USB 3.2 Gen 1x1, 5 SATA interfaces, one DisplayPort or HDMI, 5 PCI Express x1 links, and two PEG x8 links. Up to eight Gigabit Ethernet interfaces can be implemented using a rear I/O adapter board. A board management controller provides thermal supervision of the processor and a watchdog for the operating system. The G23 operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The InsydeH2O EFI BIOS was specially designed for embedded system applications. The G23 comes with a tailored passive heat sink within 4 HP height. All components are soldered for protection against shock and vibration according to applicable DIN, EN or IEC industry standards. As an option, the board can be equipped with an M12 Ethernet connector. The G23 is also ready for coating so that it can be used in humid and dusty environments and has a guaranteed minimum standard availability of 7 years. These features make the G23 perfectly suited for harsh environments. Intel Core i7, 4th generation Quad-core 64-bit processor 4 HP system master and peripheral slot PICMG CPCI-S.0 CompactPCI Serial Up to 32 GB DDR3 DRAM soldered, ECC mSATA and microSD card slots via mezzanine board Standard front I/O: 2 DisplayPort, 2 Gb Ethernet, 2 USB 3.2 Gen 1x1 Standard rear I/O: 7 PCIe, 8 USB 2.0, 2 USB 3.2 Gen 1x1, 5 SATA, DisplayPort/HDMI Rear I/O via mezzanine board: up to 8 Gigabit Ethernet Intel Turbo Boost, Hyper-Threading, AMT 9.0 Open CL support

G25A Embedded Single Board Computer with Intel Xeon D 3U CompactPCI Serial The G25A is an x86 PC based embedded computer for industrial automation and railway transportation, featuring the Intel Xeon D-1500 processor of the Broadwell-DE server family with up to 16 cores. The SBC is a COTS platform for virtualization in an Industrial Internet Of Things (IIOT) environment. The G25A is also part of the menRDC Railway Data Center. High Performance for Virtualization The G25A is a high-performance multicore CPU platform based on Intel's Xeon D-1500 System-on-a-Chip (SoC). Paired with I/O cards, the G25A can be ideally used for transferring data from and to storage media, the Internet via LTE, wireless, copper or optical Ethernet. Its up to 16 processor cores and built in Intel® VT-d and VT-x support make the board ideally suited for virtualization applications. The G25A offers high data bandwidth on both the front and the rear I/O interfaces. Two 10 Gigabit Ethernet interfaces are available on RJ45 or M12 connectors at the front, for example. USB 3.2 Gen 1x1, SATA revision 3.x, PCI Express 3.0 and Gigabit Ethernet interfaces on front and rear complement the I/O possibilities of the board. Ruggedized Memory and Mass Storage The memory configuration of the G25A includes fast DDR4 DRAM with ECC which is soldered to the board to guarantee optimum shock and vibration resistance. A microSD card device offers space for user applications or as a local boot medium. System Security and Board Management For system security, a Trusted Platform Module is assembled on the board. A board management controller provides thermal supervision of the processor and a watchdog for the operating system. Perfect for Embedded and Harsh Environments The G25A operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The G25A comes with a tailored heat sink within 4 HP height. All components are soldered for protection against shock and vibration according to applicable DIN, EN or IEC industry standards. The board is also ready for coating so that it can be used in humid and dusty environments. It is available until 2023. G229 I/O Extension Board The G229 offers one M.2 slot, three USB 3.2 Gen 1x1 interfaces, one RS232 interface, one RS422/RS485 interface, one VGA via PCI Express Mini card and up to three flexible slots for two additional RS232 or RS422/RS485 interfaces. It is combined with the G25A to form a space-saving solution with a bigger heat sink. Intel Xeon D-1500 (Broadwell DE) Up to 16 cores Up to 32 GB DDR4 DRAM soldered, ECC 2 × 10 Gb Ethernet, 1 × Gb Ethernet, 1 × USB 3.2 Gen 1x1, 1 × RS232 for configuration 4 HP system master and peripheral slots PICMG CPCI-S.0 CompactPCI Serial microSD card slot Standard rear I/O: 28 PCIe lanes, 2 × USB 3.2 Gen 1x1, 6 × SATA, 4 × Gb Ethernet VGA, RS232, RS422/RS485 and USB 3.2 Gen 1x1 available on special I/O board Built-in Intel VT hardware virtualization

A203N M-Module Carrier Board for 4 Mezzanine Cards 6U VME64 The A203N is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measurement and instrumentation, communication or special-purpose tasks. The A203N is an M-Module carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measurement and instrumentation, communication or special-purpose tasks. The M-Modules are screwed tightly on the carrier board, and the board needs only one slot on the VMEbus. The A203N is a VME64 slave card and supports four D16/D32 M-Modules with the signals either at the front or via rear I/O. An interrupt controller handles the M-Modules individually. For rugged requirements the A203N is equipped with a stiffener front panel, allows a standard -40 °C to +85 °C operation temperature and is prepared for conformal coating. Additionally, the A203N is prepared for DMA transfer support. 4 M-Module slots 1 VME64 slave slot 7-level interrupter -40 °C to +85 °C

A21C Embedded Single Board Computer, QorIQ P1xxx, PMC/XMC 6U VME64 The A21C is a PowerPC based embedded computer for industrial automation. The SBC features an NXP single-core P1013 or dual-core P1022 QorIQ processor and PMC / XMC mezzanine slots. The A21C is an NXP (formerly Freescale) QorIQ based single-board computer for embedded industrial applications. The SBC features full VME64 support and can be used as a master or a slave in a VMEbus environment. The A21C provides 1 MB local dual-ported SRAM for slave access and communication between the local CPU and another VMEbus master. The CPU card comes with a single-core P1013 or dual-core P1022 QorIQ processor with up to 1.067 GHz clock frequency and a serial communication architecture. With two Gigabit Ethernetports and one RS232 COM at the front, and DDR3 SDRAM with ECC, Flash and FRAM, the board offers the crucial basics of an industrial computer. To satisfy your needs for mass storage, you can use microSD cards and mSATA plug-in modules. In addition, the A21C can be equipped with up to two XMC or PMC mezzanine cards on shared sites, providing both front I/O (XMC/PMC) and rear I/O (PMC) for functions such as graphics, mass storage, or further Ethernet. The two PMC slots support modules up to 64-bit/133-MHz PCI-X, while the XMC slots are powered by two PCI Express x1 links each. The modular combination of I/O functionality on a single-board computer allows to build up tailored control systems which appear as customized solutions based on standard components. Its sister card, the A21B, offers three M-Module slots instead of XMC/PMC, which are ideal for process I/O requirements. Where there's a need for even more or other I/O, the A21C also includes a custom I/O mezzanine card option that reduces the board by one PMC/XMC slot but provides interfaces like USB 2.0, COM or even custom I/O controlled by the onboard FPGA. The mezzanine card is always an entirely customized adapter PCB, including front I/O, and makes the A21C a semi-custom solution. The A21C supports operation in a -40°C to +85°C temperature range, and the board withstands shock and vibration. The CPU board is supported by the U-Boot Universal Boot Loader, which can be used for bootstrapping operating systems, for hardware testing, or for debugging applications without running any operating system. NXP PowerPC QorIQ P1013, 800 MHz Up to dual-core P1022, 1.067 GHz 64-bit VMEbus master and slave Up to 2 GB DDR3 DRAM soldered, ECC Up to 64 MB Flash and 128 KB FRAM microSD card and mSATA slot 2 Gb Ethernet, 1 COM, additional I/O options 2 PMC/XMC slots U-Boot Universal Boot Loader -40 °C to +85 °C