MM50 ESMini COM with PowerPC MPC512x Computer-On-Module The MM50 is an ultra-small and rugged Computer-On-Module (COM) of the ESMini family featuring an PowerPC MPC5121e or MPC5123 CPU. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The MM50 supports conductive cooling technology and is 100% EMC proof. The MM50 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The MM50 is controlled by thePowerPC MPC5121e or MPC5123, an e300 core processor with a performance of up to 400 MHz and optimized for mobile applications. With its integrated I/O features and powerful graphics engine, the MPC5121e pairs advanced video features with low power and excellent price/performance. Due to its architecture, the CPU has a power consumption of less than 3 W. The MPC5123 also integrates graphics but has no 3D acceleration. The MM50 accommodates up to 512 MB of directly soldered main memory and supports memoryextensions via SDHC on the carrier board, e.g., using MMC, SD, or SDIO cards. The COM module also comes with a multitude of I/O: besides modern serial I/O like USB (SATA prepared), it also provides legacy I/O (up to 4 CAN, 2 COM, 1 Fast Ethernet, 3 I2C,GPIO lines). Its display interface and AC'97 audio gear the MM50 for multimedia applications, while its six programmable serial controllers give additional flexibility to implement more serial I/O. The MM50 is screened for operation in a -40°C to +85°C temperature range with suitable airflow. As all ESMini modules it can also be embedded in a covered frame. This ensures EMC protection and allows efficient conduction cooling, if needed, e.g., in harsh environments. ESMini modules are firmly screwed to acarrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM50 supports a 95 x 55 mm form factor. For evaluation and development purposes a microATX carrier board is available. MPC5121e or MPC5123, up to 400 MHz Up to 512 MB DDR2 SDRAM Flash, FRAM 1 Fast Ethernet interface 6 USB 2.0 (1 client) 2 UARTs Up to 4 CAN bus interfaces 6 programmable serial controllers, or display interface AC'97 audio U-Boot Universal Boot Loader -40 °C to +85 °C

F50P Embedded Single Board Computer with QorIQ MPC8548 3U CompactPCI PlusIO The F50P is a low-power PowerPC based embedded computer for industrial automation and railway transportation, featuring a PowerQUICC P3 processor. The SBC is compliant with the PICMG 2.30 standard and as such a perfect migration path from CompactPCI to CompactPCI Serial. The F50P is a versatile, rugged PowerPC based single-board computer for embedded applications. It is controlled by an MPC8548, or optionally an MPC8543 PowerPC processor (alternatively with encryption unit) with clock frequencies between 800 MHz and 1.5 GHz. The SBC is equipped with ECC-controlled, soldered-on DDR2 RAM for data storage, with up to 16 GB of solid-state Flash disk for program storage as well as industrial FRAM and SRAM. The CPU card provides up to three Gigabit Ethernet channels, six USB ports, up to two SATA interfaces and up to 64 user-definable I/O lines controlled by an optional onboard FPGA. These interfaces can be combined in many variations and are available at the front or at the rear using the board's J2 connector. The J2 pin assignment and connector type are in compliance with the PICMG 2.30 CompactPCI PlusIO standard - the migration path towards CompactPCI Serial. Two USB and two RJ45 Ethernet connectors are already provided at the front panel, and space is left for an optionalVGA connector. The large FPGA on the F50P allows to add additional user-defined functions such as graphics, touch, serial interfaces, fieldbus controllers, binary I/O etc. for the needs of the individual application in an extremely flexible way. Before boot-up of the system, the FPGA is loaded from boot Flash. Updates of the FPGA contents can be made inside the boot Flash during operation. If the FPGA is assembled, the card needs an extra 4 HP in front panel space. Equipped with a PCI-bridge chip, the F50P offers a full CompactPCI interface (system slot functionality) for reliable system expansion. Apart from that, the F50P can also be used as a busless, stand-alone board, with power supply from the backplane. Being designed for operation in a conduction or convection cooled environment, the F50P provides flexibility also in its cooling concept. Its firmly plugged-on CPU module is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling for the F50C model, which is also available by standard. For air cooling, the F50P version comes with a tailor-made heat sink on top of the cover, requiring an 8-HP front panel, for an extended temperature range of -40°C to +70°C. The soldered components on the F50P withstand shock and vibration, and the board design is optimized for conformal coating. The F50P comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. 32-bit CompactPCI and PICMG 2.30 PlusIO 8 HP or 12 HP with front I/O MPC8548 (or MPC8543), up to 1.5 GHz Up to 2 GB (ECC) DDR2 SDRAM Up to 128 KB FRAM, 2 MB SRAM Up to 16 GB SSD Flash Standard front I/O: 2 Gb Ethernet, 2 USB Standard rear I/O: 4 USB, 2 SATA FPGA for user-defined I/O functions (option) MENMON BIOS for PowerPC cards -40°C to +70°C (8 HP) (screened)

M43 8 Relay Outputs M-Module The mezzanine card M43 is a relay output M-Module for free potential switching of eight signals. The M43 mezzanine card is a relay output M-Module for free potential switching of eight signals. It is designed for industrial process I/O applications. The relays implemented guarantee highest reliability and long life. The M43 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 8 relay outputs 1 A switching power per relay One throw-over contact per relay Output voltage range max. 48 V No separate supply voltage

G51 QorIQ Communications CPU Board 3U CompactPCI Serial The G51 SBC unites the benefits of CPCI Serial and the interface and calculation capabilities of the quad-core P3041 QorIQ CPU, with a total of 4 Gb Ethernet ports. The G51 single-board computer unites the benefits of CompactPCI Serial and the interface capabilities and calculation power of a QorIQ CPU. Being based on an NXP quad-core QorIQ P3041 processor, the 3U, 4 HP SBC provides a large number of high-speed serial interfaces both at the front and at the CPCI-S.0 rear connectors. Three Gigabit Ethernet channels at the front and another standard port at the rear provide solid connectivity. The three front ports can also be routed to the rear, so that a maximum of four Ethernet channels are available on the backplane. This routing option is a standard feature, and can be set in the U-Boot boot loader. In a similar way, the G51 single-board computer comes with two SATA 2.x channels, where one can either be used for an onboard mSATA 2.x disk, or as a second port at the rear - also switchable via U-Boot. SGPIO is available, too. The G51 comes with one USB 2.0 front port, one USB 2.0 configuration port and five standard rear USB 2.0 ports. The USB front interface can be led to the rear as a hardware option, for a total of six USB backplane channels. Three PCI Express links (two x2 and one x4) add another important column of CompactPCI Serial features to the G51's rear I/O. Its abundant connectivity, flexible configuration options and multi-core computing performance make the G51 a universal off-the-shelf platform for all kinds of communication and processing tasks. Data acquisition, data encryption, simulation and process control systems are only a few examples. Suitable CompactPCI Serial peripheral cards are available to add specialized functions in a modular system where necessary. Apart from its connectivity, the card comes with fast DDR3 RAM, a microSD card slot, a number of board management functions and Linux BSP support. All components are soldered for protection against shock and vibration and withstand an extended operating temperature of -40°C to +85°C. As an option, the board can be equipped with M12 Ethernet front connectors. The G51 is also ready for coating so that it can be used in humid and dusty environments. All this makes the G51 a perfect choice for railway, aerospace or marine applications, but also for fields like automation or power & energy, where computers face harsh environments. Single-board computer with up to 4 Gb Ethernet P3041 NXP QorIQ quad-core PowerPC processor 4 HP system master and peripheral slot PICMG CPCI-S.0 CompactPCI Serial Up to 8 GB DDR3 SDRAM soldered, ECC Standard front I/O: 3 Gb Ethernet, 2 USB 2.0 Standard rear I/O: 3 PCIe, 4 Gb Ethernet, 5 USB 2.0, 2 SATA (3 Gb) -40 to +85°C with qualified components Compliant to EN 50155 (railways)

PU5 Power Supply Unit, 110 VDC, 100 W 3U 12 HP PSU The PU5 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU5 is a plug-in power supply unit for 19" systems (e.g. VMEbus, CompactPCI) and is especially designed for computer systems in public transport vehicles, being fully compliant with EN 50155. The PU5 has a nominal input voltage of 110 VDC with a wide input range of 77 V to 137.5 V and a maximum input voltage range of 66 V to 154 V (according to EN 50155). The otherwise identical PSU models PU6 and PU8 are available for the nominal input voltages of 24 VDC and 36 VDC, respectively. It is controlled by a microprocessor which supervises the voltage and the temperature as well as one external input (for its key input function) and one output. Thanks to the onboard intelligence the PSU can also act as an SMBus slave and communicate with the CPU board via the backplane. This allows the PSU to power on the system at a programmed date and enables the CPU to make status polls with regard to, e.g., error messages, time-out or on/off. The PSU provides a DC/DC converter to generate the isolated 12 V from the input voltage. Two regulators generate 5 V and 3.3 V from the 12 V isolated side. The maximum power at full load is 100 W total, with 40 W on 3.3 V and 60 W on 5 V. The minimum power is 5 W. The microprocessor is supplied with power independently and can turn off the main DC/DC converter to switch the unit into standby mode (power consumption less than 6 W). The subassembly is conformally coated, and components are secured against vibration. The PSU operates in -40 °C to +85 °C environmental temperature. The thermal stress is extremely low due to integrated heat sinks and diversion of dissipated heat over the mounting surface. The exact configuration and features of PU5 vary depending on the ordered model. 3U, 12 HP, 19" rack mountable Input 110 VDC nom. (77 to 137.5 V) Max. input voltage range 66 to 154 V (according to EN 50155) Output 3.3 V, 5 V, 12 V H15 DIN 41612 plug connector (front and rear) SMBus External I/Os for key input function Standby mode (1 W max.) -40 °C to +85 °C Conformal coating EN 50155 compliant (holdup time according to Class S2) (railways)

XM2 ESMexpress COM with Intel Core 2 Duo Computer-On-Module The XM2 is a Computer-On-Module of the ESMexpress family equipped with a Intel Core 2 Duo processor. The XM2 is a Computer-On-Module which together with an application-specific carrier board forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The XM2 is controlled by a Intel Core 2 Duo CPU with a clock frequency of up to 2.26 GHz and a total power consumption of up to 40W. The XM2 can accommodate 4 GB of DDR3 DRAM memory and supports other memory like USB Flash on the carrier board. The GS45 graphics controller supports x16 PCI Express Graphics or up to two SDVO interfaces, or one LVDS port. In addition, four x1 or one x4 PCI Express links are supported by the XM2. Other modern serial interfaces are 2 Gigabit Ethernet channels, 8 USB ports, 3 SATA ports, and one HD audio port. These interfaces are all routedfrom the XM2 for availability on any ESMexpress carrier board. The XM2 is completed by a board management controller for temperature and power supervision. It comes with an InsydeH2O EFI BIOS configurable for the final application. The XM2 is screenedfor operation from 0°C to +85°C (Tcase). As all ESMexpress modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is alsopossible by applying a heat sink on top of the cover. With a low power processor the module may even be operated in an extended temperature range. ESMexpress modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. All ESMexpress modules support a single 95x125mm form factor. For evaluation and development purposes an ATX carrier board is available. The ESMexpress module can be evaluated on a COM Express carrier board via an adapter from ESMexpress to COM Express. Intel Core 2 Duo up to 2.26 GHz Up to 4 GB DDR3 SDRAM 1 x 16 PCI Express Graphics link 4 x 1 PCI Express links 2 Gb Ethernet 3 SATA ports 8 USB 2.0 Up to 2 SDVO ports Intel HD audio 0°C to +85°C Tcase screened Conduction cooling

P598 Conduction-Cooled FPGA-based USM Main PMC PCI Mezzanine Card The P598 is a conduction-cooled USM main mezzanine PMC with onboard FPGA. USM Universal Submodules make PMC modules more flexible than ever. The conduction-cooled main PMC P598 gets its specific function through the IP cores implemented inside the onboard FPGA. This function can be changed at any time through implementation of different IP cores. The corresponding line drivers are realized on the USM which is simply plugged on the P598. The same USM may also be used on convection-cooled PMCs and XMCs or main M-Modules. A new design is then limited to the USM module and the FPGA content and therefore saves development time and costs. A Nios soft processor implemented in the Cyclone II FPGA by Altera provides local intelligence where needed. The growing range of Wishbone-based standard IP cores from duagon comprise different UARTs, Ethernet, fieldbus interfaces, digital I/O etc. For users that like to write and/or implement specific IP cores on their own a complete development kit is available. The kit is based on a function-identical convection-cooled PMC module with front I/O. The USM concept has been developed for harsh environment. Therefore, the P598 uses robust connectors to the USM, while all other components are soldered, and operates in a -40 to +85 °C temperature range with qualified components. The P598 is a conduction-cooled PMC mezzanine card suitable for any compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate carrier cards in 3U, 6U andother formats are available from duagon or other manufacturers. Main PMC for USM Universal Submodules Conduction-cooled (CCPMC) 1 USM slot 1 FPGA 33,216 LE (for user-defined I/O and Nios soft core) 32 MB DDR2 SDRAM 2 MB Flash -40 to +85°C with qualified components

P512 Reflective Memory PMC PCI Mezzanine Card The P512 is a Reflective Memory PMC mezzanine module for redundant computer structures in safety-critical applications. The P512 offers Reflective Memory functionality, for example for redundant computer structures in safety-critical applications. Reflective memory is a memory bus technology from Encore Computer that allows simultaneous reads and writes to multiple memories. It can be used to share memory among multiple CPUs. The advantage of reflective memory is the possibility to set up deterministic real-time communication networks across computer systems and operating systems. Each P512 module offers one LVDS channel. The modules can be interconnected in a fully connected mesh and support multi-mode up to two meters. Each computer in a system needs one PMC for each connection to another computer (2 computers: 1 PMC each, 3 computers: 2 PMCs each etc). The module is equipped with 32 MB DDR2 DRAM. The P512 is a PMC mezzanine card suitable for any PMC compliant host carrier board in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC in telecommunication, industrial, medical, transportation or aerospace applications. It supports 32 bits/33 MHz. Appropriate PMC carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 32-bit/33-MHz PMC 1 LVDS channel Usable in a fully connected mesh Multi-mode up to 2 meters 32 MB DDR2 SDRAM -40 to +85°C with qualified components

MM1 ESMini COM with Intel Atom Computer-On-Module The MM1 is an ultra-small Computer-On-Module of the rugged ESMini family equipped with an Intel Atom Z510 or Z530 processor. The MM1 is an ultra-small Computer-On-Module of the rugged ESMini family. Together with an application-specific carrier board it forms a semi-custom solution for industrial, harsh, mobile and mission-critical environments. The MM1 is controlled by the Intel Atom processor, a first generation IA-32 core based on 45nm process technology. Due to the new power architecture of the Intel Atom CPU, the MM1 has a total power consumption of max. 5 to 10 W, while having a clock frequency of up to 1.6 GHz. The MM1 accommodates up to 1 GB of directly soldered main memory and supports other memory like USB Flash on the carrier board. The MM1 offers a multitude of I/O: besides modern serial I/O like one PCI Express x1 link, LVDS, SDVO, high-definition audio, SATA and USB, it also provides legacy I/O (2 CAN, 2 COM, 2 Fast Ethernet, 2 I2C) and up to 120 FPGA signals. The MM1 is completed by a board management controller for temperature and power supervision. It comes with a Phoenix Award BIOS configurable for the final application. The MM1 is screened for operation in a -40°C to +85°C temperature range (Tcase, -25°C to +85°C for board versions with 1 GB DRAM). As all ESMini modules it is embedded in a covered frame. This ensures EMC protection and allows efficient conductive cooling. Air cooling is also possible by applying a heat sink on top of the cover. Where operation temperatures are moderate, the module may even do without the frame and cover, with a suitable low-power processor and airflow. ESMini modules are firmly screwed to a carrier board and come with rugged industry-proven connectors supporting high frequency and differential signals. Only soldered components are used to withstand shock and vibration, and the design is optimized for conformal coating. The MM1 supports a 95x55mm form factor. For evaluation and development purposes a microATX carrier board is available. Intel Atom Z530 or Z510, up to 1.6 GHz Up to 1 GB DDR2 SDRAM 1 PCI Express Up to 2 Fast Ethernet interfaces 8 USB 2.0 (1 client) 2 UARTs Up to 2 CAN bus interfaces SDVO, LVDS Intel HD Audio -40°C to +85°C Tcase screened (-25°C to +85°C Tcase with 1 GB DRAM) Conduction cooling

EM9 Embedded System Module COM with MPC8548 Computer-On-Module The EM9 Computer-On-Module is an MPC8548/MPC8543 PowerPC based embedded SBC for use in different industrial environments, with custom I/O in an onboard FPGA and front connectors. The EM9 is a complete embedded SBC for use on any carrier board in different industrial environments. The final application consists of a stand-alone EM9, an EM9 with an application-specific carrier card and/or with additional PCI-104 modules. The EM9is controlled by an integrated PowerPC MPC8548 or MPC8543 processor (optionally with encryption unit) running at clock frequencies between 800 MHz and 1.5 GHz. The EM9 is equipped with soldered DDR2 SDRAM for data and with NAND Flash for program storage. It provides front-panel access for three Gigabit Ethernet channels and one COM port via four RJ45 connectors. Additional functionality such as graphics, touch, CAN bus, protocol converters etc. can be realized in an FPGA for the needs of the individualapplication. The corresponding connectors are available on a carrier board. Application software dynamically loads the functions of the FPGA. The EM9 comes with MENMON support. This firmware/BIOS can be used for bootstrapping operating systems (from disk, Flash or network), for hardware testing, or for debugging applications without running any operating system. The EM9 is a communication engine ideal for use in embedded applications, for instance as an embedded Linux server, but also for high-end automation and robot control under a real-time operating system. For a first evaluation of the functions of the EM9 we strongly recommend to use the EK9 ESM starter kit. The kit consists of the standard CPU module, an FPGA loaded with additional I/O functions, the carrier card with I/O connectors, an external PSU, cables, and an adapter for mounting a PCI-104 module. ESM modules consist of the hardware (CPU, chip set, memory, I/O) which is not fixed to any application-specific function, and an FPGA programmed in VHDL code, which provides I/O that is also still independent of a specific application. ESM modules are based on PCI. They have two or three system connectors: J1 has a fixed signal assignment, while J2 is variable depending on the final application-specific configuration of the ESM and the carrier board. J2 also feeds the I/O signals of the functions programmed in the FPGA to the carrier card. Some ESM modules have an additional J3 connector that is used to replace the front I/O connectors to route the signals to the carrier board or to the backplane of a CPCI or VME system. MPC8548 (or MPC8543), up to 1.5 GHz FPGA 33,216 LEs 32-bit/33/66-MHz PCI Up to 2 GB onboard DDR2 SDRAM 1 GB NAND Flash 128 KB FRAM, 32 MB additional SDRAM 3 (or 2) Gb Ethernet, 1 COM (RJ45) User defined I/O functions (COMs, CAN bus, graphics, IDE etc.) optional via FPGA on carrier Stackable with PCI-104 MENMON BIOS for PowerPC cards -40 to +85°C screened