Merkmale
- 8 relay outputs1 A switching power per relayOne throw-over contact per relayOutput voltage range max. 48 VNo separate supply voltage
M43 - 8 Relay Outputs (Produkt eingestellt)
The M43 mezzanine card is a relay output M-Module for free potential switching of eight signals. It is designed for industrial process I/O applications.
The relays implemented guarantee highest reliability and long life.
The M43 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers.
Spezifikationen
- Relay Outputs
- 8 outputs as throw-over contacts
- NO (normally open), NC (normally closed) and common contacts
- Ratings
- Maximum switching voltage: 48V
- Maximum switching current: 3A
- Maximum operation current: 1A
- Maximum switching power: 60W
- Switching Time
- 2ms typ. for NO and NC
- Miscellaneous
- Relay status can be read out - "read-modify-write" accesses possible
- Low heat development by use of CMOS components
- Peripheral Connections
- Via front panel on a shielded 25-pin D-Sub receptacle connector
- Via carrier board (rear I/O)
- M-Module Characteristics
- A08, D08, IDENT
- Electrical Specifications
- Supply voltage/power consumption: +5V (-3%/+5%), 700mA typ. (all relays active)
- MTBF: 1,000,000h @ 50°C (derived from MIL-HDBK-217F)
- Mechanical Specifications
- Dimensions: conforming to M-Module Standard
- Weight: 98g
- Environmental Specifications
- Temperature range (operation):
- 0..+60°C
- Industrial temperature range on request
- Airflow: min. 10m³/h
- Temperature range (storage): -40..+85°C
- Relative humidity range (operation): max. 95% non-condensing
- Relative humidity range (storage): max. 95% non-condensing
- Altitude: -300m to + 3,000m
- Shock: 15g/11ms
- Bump: 10g/16ms
- Vibration (sinusoidal): 2g/10..150Hz
- Temperature range (operation):
- Safety
- PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
- EMC
- Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
- Software Support
- MEN Driver Interface System (MDIS for Windows, Linux, VxWorks, QNX)
- For more information on supported operating system versions and drivers see Software.
Software
Linux
- 13MD05-90
-
MDIS5 System Package (duagon) for LinuxDateiname: 13md05-90.zip | Veröffentlicht: 07. Mai, 2023ZIP | 14 MBSha1-Checksumme: 7c53ef64a2abf1b65a54932d613f913ae0b4040a Details
Windows
- 13M043-70
-
MDIS5 Windows driver (MEN) for M43/M43NDateiname: 13m043-70.zip | Veröffentlicht: 27. April, 2020ZIP | 2 MBSha1-Checksumme: 9091c824bbf683aa1f4ac8d50b2351a33c287a3d Details
QNX
- 13M000-15
-
MDIS4 system package (MEN) for QNXDateiname: 13m000-15.zip | Veröffentlicht: 27. April, 2020ZIP | 14 MBSha1-Checksumme: f2e9239b5eb1ea48f490ad46e192058d4af38441 Details
VxWorks
- 13MD05-60
-
MDIS5 System Package (MEN) for VxWorksDateiname: 13md05-60.zip | Veröffentlicht: 27. April, 2020ZIP | 19 MBSha1-Checksumme: c28db0cb4d3b933bf23f03ca3e8b38a0d3b8e0d5 Details