M62N Mezzanine Card with 16 Analog Outputs, 15/16 Bits M-Module The M62N is an M-Module with 16 analog current outputs (15 bits resolution) or voltage outputs (16 bits resolution). It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M62N is an analog output device with as many as 16 channels on one single M-Module. The isolated supply voltages are generated by an on-board DC/DC converter. The output voltage range is programmable to 0 to 10 V or -10 to +10 V. Alternatively, current outputs are available within a range of 4 to 20 mA. The output load is driven to ground. For driving more than 6 current outputs at the same time an external supply is needed! The M62N is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 16 current or voltage outputs 16 bits resolution with voltage outputs 15 bits resolution with current outputs Typ. 11.5 µs conversion time Electrical isolation (500 V DC) -40 °C to +85 °C

M47 Mezzanine Card with SSI Controller M-Module The M47 is an M-Module with an Serial Synchronous Interface for connection of up to 4 sensors to optically isolated SSI outputs. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M47 is a Serial Synchronous Interface M-Module for connection of up to four sensors to optically isolated SSI outputs. Serial synchronous interfaces are commonly used for many kinds of sensors such as rotary encoders. Connection to the sensors is made by two signals - a transmit clock and a receive data signal. All communication and signal decoding is done in an FPGA. Gray and binary decoding, the baud rate and word length are programmable for every single channel. The current value can be read from the DPR at any time. In addition, the M47 features line-break detection. The M47 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 4-channel 32-bit SSI Serial Synchronous Interface RS422A interface Automatic communication RAM-like double buffer user interface Gray/binary decoding for each channel Line-break detection Absolute value data input External Baud rate possible Optical isolation for each channel -40 °C to +85 °C versions

M77N Mezzanine Card with 4 UARTs M-Module The M77N is an M-Module with 4 high-performance RS232 or RS422/485 ports. It is designed as a replacement for M77 for automation, medical or in-vehicle applications in combination with duagon (MEN) F12, F18 and A203. Quad Serial Interface M-Module The M77N M-Module is a quad serial interface mezzanine card. It supports four high-performance UARTs with RS232 or RS422/485 level at the front-panel D-Sub connector or at its 24-pin onboard connector. The 24-pin onboard connector is typically used to lead the I/O signals to the carrier board where they are transferred to the rear I/O connector. The interface mode of the M77N can be changed by means of software. The termination resistor for RS422/485 must be set up through an external connection in the cable. Based on ANSI Standard The M77N is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Cost Saving Replacement The M77N is designed as a replacement for M77 in combination with duagon F12, F18 and A203. It is duagon driver software compatible to the predecessor M77 M-Module, which means no changes in application design are necessary as far as the duagon driver package is used. Optical Isolation All out-bound interface lines are optically isolated from the internal digital ground, board and system electronics, which is essential for advanced automotive and industrial applications. Optical isolation makes the module usable in critical environments, e.g., in trains, because it saves the controlling computer from external disturbances like high voltage pulses. Reliable and Robust The M77N can operate in a -40 °C to +85 °C temperature range according to EN 50155. All components in the cable-less design are soldered and the board withstands shock and vibration for reliable operation. With a guaranteed standard life-time of seven years from product start, M77N facilitates the client’s life-cycle management by making the board available at least for this period of time. 4 high-performance UARTs Compatible to 16550 UART 128 bytes FIFO buffer Serial data rates up to 2 Mbit/s Software programmable Full and half duplex on 4 channels 500 V AC optical isolation -40 °C to +85 °C

M72 Mezzanine Card with Motion Counter M-Module The M72 is an M-Module with 4 cascadable 32-bit counter units supporting timer, counter and comparator functions. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The M72 M-Module is a timer, counter and comparator with four 32-bit counter units. The four counters work independently in several modes, e.g. counting decoder signals or measuring frequencies. Each counter can be loaded with a preset value and can generate several events. Events can set or reset output signals, which are optically isolated. The mezzanine card M72 can also be used to generate timed signals. In addition it features line-break detection. The sensor signals are optically isolated and can be used as TTL, RS422 or 24 V inputs. The M72 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 4 independent cascadable 32-bit counters 2 comparators per counter Quadrature incremental encoder interface Pulse width/frequency measurement Multimode event generation Customized counter modes via FPGA RS422 or TTL or 24V Optical isolation -40 °C to +85 °C versions

MH70R Main Server with Intel Xeon D for Railway Data Center Modular Virtualization Computer for the Connected Train The MH70R open source railway server is the central component of the menRDC railway data center with an Intel Xeon D CPU board offering 10 Gb and Gb Ethernet, USB 3.0 as well as wireless communication and storage. Variable Modular Concept The MH70R is not a single standard product, it is rather a modular concept, which is available within a project context and therefore very flexible for use in various applications. Main Server Unit and Centralized Platform The MH70R main server unit acts as the central component of the railway data center. Several distributed functions are combined into a centralized platform, which reduces the amount of devices within the application environment. Railway Data Center The railway data center is the mobile office IT computer for virtually all non-vital train applications, e.g., PIS, media streaming, onboard internet or diagnosis server. It is a general purpose, modular platform. The hardware is solely based on standard technologies, supporting a flexible and scalable configuration of the end system with plug-and-play wireless communication channels, storage extensions, connectivity to other train computers, or I/O interfaces to sensors and actuators. Another standard system offered as part of a railway data center is, e.g., the MH70S data storage system. High-Performance CPU, Virtualization and Security The system is based on a high-performance Intel Xeon-D processor. Being an open virtualization platform, it supports Intel VT-x and VT-d technology to virtualize several functions, e.g., video surveillance or ticketing. The software can be developed without hardware which reduces the development time. It also supports a Trusted Platform Module (TPM) for security implemented through cryptography, as well as an error-correcting code (ECC) memory, board and system management control, and a watchdog timer to ensure reliability. Modular Design Based on a modular 40 HP CompactPCI Serial system, the MH70R can be wall or rack-mounted and offers a multitude of configuration possibilities resulting in a fast time-to-market. For the concept, a high-performance, high-bandwidth multi-core CPU board offering 10 Gigabit and Gigabit Ethernet interfaces, legacy serial I/O such as RS232, and USB 3.0 interfaces is available. The most common wireless communication functions can be implemented in the MH70R via CompactPCI Serial peripheral boards, as well as hot-pluggable and easy to exchange HDD/SSD shuttles which allow easy maintenance in the field. The system is cooled by using an additional fan tray at the bottom of the system. Cooling is independent of the mounting position. Designed for Harsh Environments The MH70R is designed for operation in a -40 °C to +70 °C temperature range according to EN 50155. The system withstands shock and vibration for reliable operation and a longer product life-time. Intel Xeon D-1500 (Broadwell DE) CPU with up to 16 cores 2 × 10 Gb Ethernet and 1 × 1 Gb Ethernet 2 CompactPCI Serial slots for USB, RS232, RS422/485 interfaces and M.2 NVMe SSD 4 CompactPCI Serial slots for wireless functions or 2.5" HDD/SSD Compact 40 HP application-ready rack- or wall-mounted system Modular design Open source virtualization platform

MH70I Rugged Industrial PC with Intel Core i3 / i5 / i7 Modular Built-to-Order Embedded Computer for Industrial Automation The MH70I is an application-ready 4U 40 HP rugged embedded industrial PC which is built to order from standard computer boards and components to meet individual requirements in a fast and cost-effective way. Modular, Built-to-Order Configuration The MH70I is a modular application-ready industrial PC which meets the requirements of any industrial environment, e.g., control stations for industrial automation. The PC offers a multitude of configuration possibilities which are built to order resulting in a fast time-to-market. The system comes with complete software support. The Intel Core i7-based system consists of a modular 40 HP CompactPCI system which can be wall or rack-mounted. The system can be cooled by natural convection or using an additional fan tray at the bottom of the system. Cooling is independent of the mounting position. Redundant Power Supply The pre-configured system offers two PSU slots to ensure reliability and redundancy. Normal operation is guaranteed if at least one external voltage is present. AC or DC power supplies can be implemented. Large Range of Functions Two CompactPCI peripheral slots and two CompactPCI Serial peripheral slots as well as 2 PCI or PCI Express slots can accommodate a large range of functions. If the 2 PCI or PCI Express slots are not required, two additional CompactPCI Serial peripheral slots are available. Possible functions of the MH70I include binary and analog process I/O or motion counters as well as COMs and fieldbus functions such as CANopen, DeviceNet, Real-Time-Ethernet (EtherCAT, EtherNet/IP, Modbus, POWERLINK, PROFINET, SERCOS, Varan) and PROFIBUS (master and slave for all functions). The system always offers 2 Gigabit Ethernet interfaces at the front of the CPU board. For extending the Ethernet functionality, there is the possibility to implement up to 8 additional standard RJ45 or fiber optics Ethernet interfaces in the Compact PCI Serial slots. PCI Express Mini cards for wireless functions such as WLAN and UMTS can also be provided. A SATA RAID can be built using up to four CompactPCI Serial hard disk carrier boards. The two PCI or PCI Express slots can be equipped with half-length cards for further customized extension of the system. Compact 40 HP application-ready system Rack-mounted or wall-mounted Fanless operation or forced-air cooling Intel Core i7 or Celeron with standard HMI graphics Up to 16 GB DDR3 DRAM soldered, ECC Up to four SATA hard disks for a RAID Single or redundant power supply (AC or DC) 2 CompactPCI slots for fieldbus functions, RS232, analog I/O, digital I/O, Ethernet 2 CompactPCI Serial slots for SATA RAIDs, Ethernet 2 PCI or PCI Express slots for half-length cards Pre-configured operating system and drivers

M58 Mezzanine Card with 32-bit TTL I/O Interface M-Module The M58 is an M-Module with 32 TTL I/O lines which is used for fast and trouble-free transmission of binary signals. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M58 is a TTL I/O M-Module which is used for fast and trouble-free transmission of binary signals. It is organized in four 8-bit groups, where each group can be programmed as an input or output. Every group supports active termination, which can be activated by software. A trigger line allows simultaneous acquisition of the inputs of several groups - also on several modules - at a specific point of time. All port lines are ESD-protected, but not optically isolated. The M58 is basedon the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 32 TTL inputs/outputs Output current per pin: max. 25 mA Active terminators Same line interface as SCSI Fast 16-bit host access -40 °C to +85 °C versions

M37N Mezzanine Card with 4 Analog Outputs, 16 Bits M-Module The M37N is an M-Module with 4 analog voltage or current outputs and 16 bits resolution. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M37N is a high-precision M-Module with four analog voltage, or alternatively current output channels for very fast signals. The output voltage range for each channel is -10 to +10 V. The current outputs are separately available and canbe used as 0 to 20 mA outputs. The M-Module comes with 16 bits resolution at an ultra-high voltage accuracy of +/-0.1% which is valid for the complete temperature range from -40 to +85°C. Beyond that it is optionally possible to even extend these values by additional calibration. The M37N supports a load resistance of 600 Ohms and more. The isolated supply voltages can be generated on the board by two low-noise DC/DC converters. The output load is driven to ground. The M37N is designed for a large range of applications, for example in an automated test environment, in process control systems or for sensor measurements. The M37N is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 4 current or voltage outputs 16 bits resolution 8.5 µs max. acquisition/conversion time +/-0.1% accuracy Simultaneous channel update Synchronization with external trigger Electrical isolation -40 °C to +85 °C

M82 Mezzanine Card with 16 Digital 20 kHz Inputs M-Module The M82 is an M-Module with 16 fully isolated digital input channels with latching and comparator capabilities. A current limit for each input guarantees an input voltage range of 0 to 40V. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M82 is a 16-channel fully isolated input M-Module with latching and comparator capabilities for industrial applications. A current limit for each input guarantees an input voltage range of 0 V to 40 V. Each input signal edge generates a maskable interrupt for each channel. The voltage-sensitive inputs have a hysteresis function. Typical I/O applications include automated test equipment, simulators and PLC-like applications with different voltage requirements. The M82 is software-compatible with the M31. The M82 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 16 fast 20 kHz inputs 0 V to 40 V input voltage Constant current inputs Hysteresis function Interrupt generation 500 V DC isolation from the system 100 V DC isolation between the channels -40 °C to +85 °C

M81 Mezzanine Card with 16 Digital Opto-Relay Outputs M-Module The M81 is an M-Module with 16 fully isolated digital output channels that can switch DC as well as AC voltages and can also be used for analog signals. It is designed for industrial automation, medical computers, in-vehicle computers, and embedded computers in transportation. The mezzanine card M81 is a 16-channel fully isolated, fully protected digital output M-Module for industrial applications. The outputs can switch DC as well as AC voltages and can also be used for analog signals. The M81 works with parallel transmission and supports very fast, spike-free switching. The M81 switches relays, lamps or other loads. Typical I/O applications include automated test equipment, simulators and PLC-like applications. The M81 is software-compatible with M27. The M81 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 16 opto-relay outputs 0 V to 36 V output voltage per channel 500 mA output current per channel Thermal and short-circuit protection 500 V DC isolation from the system 100 V DC isolation between the channels -40 °C to +85 °C