G101 Fully Managed 29 Gbit/s Industrial Ethernet Switch, A-Coded 3U CompactPCI Serial The G101 is a managed rugged industrial Gigabit Switch with a 29 GBit/s Switch matrix and uplink, implemented as a CompactPCI Serial board. A Flexible Switch in a Common Modular Format The G101 is a fully managed 3U flexible multiport Gigabit Switch, with a 29 GBit/s switch matrix, implemented as a CompactPCI Serial board. It occupies one system slot or one peripheral slot using a 4 HP front panel with two Gigabit Ethernet ports on RJ45 connectors and one 2.5 Gb SFP cage. Alternatively, the G101 can be supplied with three M12 A-coded connectors on the front panel. A good alternative for a version with M12 X-coded connectors is the G102. The intelligent backplane concept for duagon switches allows high flexibility in network applications and management. High Speed, High Efficiency and Extensive Protocols The G101 guarantees high speed, high efficiency and an extensive firmware supporting various protocols like security, time synchronicity, stability, as well as for temperature needs. The switch supports EEE (Energy Efficient Ethernet) and IEEE1588v2 as a standard on all ports. Various Connection Possibilities due to Various Port Options The G101 features three Ethernet ports on the front. Alternatively these are available on the rear, where a total of 24 ports is possible. These include 12 ports with integrated 10/100/1000 Mbit/s copper PHYs. For the configuration of additional ports controlled via the backplane duagon offers a number of different line cards. In addition, the G101 features a high performance port with up to 2.5 Gbit/s for an SFP pluggable module to support a high-speed uplink. Increased Reliability thanks to Built-In Test Mechanisms The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol/link aggregation) and no data loss occurs. Its built-in test mechanisms make the G101 an even more reliable component in the communication system. Rugged and Compliant to Railway Standards The railway Ethernet switch is specifically designed for rugged rolling-stock communication systems. It is fully compliant with the EN 50155 railway standard and qualified for a -40 °C to +85 °C operating temperature. Fully managed rugged Ethernet switch 24 Gigabit Ethernet ports Or 24 Gigabit Ethernet ports plus 2.5 Gigabit SFP port 29 Gbit/s carrier grade switch matrix -40 °C to +85 °C EN 50155 compliant (railways) PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card

G102 Fully Managed 29 Gbit/s Industrial Ethernet Switch, X-Coded 3U CompactPCI Serial The G102 is a managed rugged industrial Gigabit Switch with a 29 GBit/s Switch matrix, implemented as a CompactPCI Serial board. A Flexible Switch in a Common Modular Format The G102 is a fully managed 3U flexible multiport Gigabit Switch, with a 29 GBit/s switch matrix, implemented as a CompactPCI Serial board. It occupies one system slot or one peripheral slot using a 4 HP front panel with three Gigabit Ethernet ports on M12 X-coded connectors on the front panel. A good alternative for a version with M12 A-coded connectors is the G101. The intelligent backplane concept for duagon switches allows high flexibility in network applications and management. High Speed, High Efficiency and Extensive Protocols The G102 guarantees high speed, high efficiency and an extensive firmware supporting various protocols like security, time synchronicity, stability, as well as for temperature needs. The switch supports EEE (Energy Efficient Ethernet) and IEEE1588v2 as a standard on all ports. Various Connection Possibilities due to Various Port Options The G102 features three Ethernet ports on the front. Alternatively these are available on the rear, where a total of 24 ports is possible. These include 12 ports with integrated 10/100/1000 Mbit/s copper PHYs. For the configuration of additional ports controlled via the backplane duagon offers a number of different line cards. Increased Reliability Through Built-In Test Mechanisms The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol/link aggregation) and no data loss occurs. Its built-in test mechanisms make the G102 an even more reliable component in the communication system. Rugged and Compliant to Railway Standards The railway Ethernet switch is specifically designed for rugged rolling-stock communication systems. It is fully compliant with the EN 50155 railway standard and qualified for a -40 °C to +85 °C operating temperature. Fully managed rugged Ethernet switch Up to 24 Gigabit Ethernet ports 29 Gbit/s carrier grade switch matrix -40 °C to +85 °C EN 50155 compliant (railways) PICMG CPCI-S.0 CompactPCI Serial system slot and peripheral card

G213 XMC/PMC Carrier Board for 1 Mezzanine Card 3U CompactPCI Serial The G213 is a universal 3U XMC or PMC carrier board for I/O with high speed requirements in a CompactPCI Serial environment. The G213 is a universal 3U XMC or PMC carrier board for I/O with high speed requirements in a CompactPCI Serial environment. It allows to add I/O functions to a CompactPCI Serial or hybrid system in a flexible way. The G213 offers instant access to thealready existing high-speed XMC modules on the market as well as to the huge range of legacy PMC modules of all different speed types. It supports efficient modular system extension with I/O that reaches from typical computer functions like communicationor graphics up to the whole world of industrial functions with analog and binary I/O, measurement, instrumentation, motion control, or fieldbus interfaces. The G213 is screened for -40°C to +85°C operation temperature and prepared for conformal coating inorder to be used also in harsh and mobile environments. The final environmental qualification depends on the respective cards used on the carrier. 1 XMC slot (PCIe 2 x4 links) or 1 PMC slot (32/64 bits, 33/66/133 MHz, PCI-X) -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card

G214 Multi-Display Controller Board with AMD Radeon E6760 GPU 3U CompactPCI Serial The G214 is a multi-display controller based on the AMD Radeon E6760 GPU (graphics processing unit), realized as 4HP/3U CompactPCI Serial peripheral board to provide high-end graphics to CompactPCI Serial systems. High Resolution and Long-Term Availability The G214 is a 4HP/3U CompactPCI Serial peripheral board based on the AMD Radeon E6760 GPU. The board is an easy way to provide a CompactPCI Serial system with high-end graphics features that are not offered by regular CPU chipsets. The supported high resolutions and multi-display output make the board ideal to meet the visual requirements of central control rooms, video surveillance systems or digital signage applications. All board components are carefully selected to offer long-term availability for at least 7 years. Multiple Display Outputs AMD Eyefinity multi-display technology supports up to six display outputs: Four DisplayPort 1.2 interfaces with a maximum resolution of 4096x2560 at 60 Hz and 24 bpp are available at the board's front panel, another two DisplayPort 1.1a interfaces with a maximum resolution of 2560x1600 are optional (widening the front panel to 8HP). Alternatively, DisplayPort 1.2 supports daisy chaining of compatible displays. If the connected panels support the same resolutions, they can be addressed as a "single large surface", effectively functioning as one monitor with a very large resolution. Advanced Technology The advanced, programmable 3D graphics engine of the AMD Radeon E6760 supports Microsoft DirectX 11 and comes with a third generation unified video decoder,enabling dual HD decode of H.264, VC-1, MPEG4 and MPEG2 compressed video streams. The GPU is also an ideal solution for embedded applications requiring compute intensive general purpose graphics processing unit (GPGPU) capabilities. With 480 processing elements, it delivers up to 576 GFLOPs peak single precision floating point performance for ultrasound, radar and video imaging applications. The GPGPU capabilities are enabled by AMD Accelerated Processing (APP) technology, the industry standard OpenCL programming language and the AMD APP Software Development Kit (SDK). Connectivity Options Using passive DisplayPort adapters, up to two HDMI or DVI-D monitors can be connected. Single-link DVI-D and HDMI 1.4a are supported. With active adapters, all six DisplayPort interfaces can be used. Active adapters are also available for dual-link DVI-D and VGA. AMD Radeon E6760 GPU, 600 MHz 6 SIMD engines, 480 shaders 1 GB integrated graphics RAM AMD EyeSpeed, Eyefinity and HD3D technologies DirectX 11, OpenGL 4.1, OpenCL 1.1 Up to 6 DisplayPort (4 DP 1.2, 2 DP 1.1a) Max. resolution 4096x2560 @ 60 Hz, 24 bpp or 3840x2400 @ 60 Hz, 30 bpp 1 PCIe x8 CPU interface PICMG CPCI-S.0 CompactPCI Serial peripheral card

G233 Diagnostic Board with Front Display 3U CompactPCI Serial The G233 is a rugged 3U CompactPCI Serial card with OLED display for customized interactive diagnostics. Interactive OLED Display The G233 is a 3U CompactPCI Serial board featuring a 3.12" OLED display for showing diagnostic status and error messages. Two control buttons at the front panel can be used for user interactions, e.g. scrolling or doing set-up. Eight programmable LEDs are provided for user-defined functions. Simpler Troubleshooting and Less Downtime The G233 provides an easy to use, interactive diagnostics interface suitable for train maintenance personnel during troubleshooting or performing routine service checks. The displayed information is fully customizable. Any status or fault message visible to the host CPU can be sent to the G233 and shown on the display or represented by the LEDs. Shorter Development and Integration Time The native onboard web browser communicates via backplane Ethernet interface with a web server running on the host CPU. Only an HTTP web server software is required on the host computer which facilitates integration and set-up. Full Configuration of Displayed Data and Front Panel LEDs The displayed data is controlled by writing to an HTML file. Any status or error message available to the CPU can be shown on the front panel. Suited for Harsh and Mobile Environments The G233 is designed for -40 to +85°C operating temperature and conformal coated in order to be used also in harsh and mobile environments. OLED mono-chrome display 256 x 64 pixels resolution 2 front panel buttons for user interaction Ethernet host interface Local web browser 8 user LEDs on the front panel -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card

G22 Embedded Single Board Computer with Intel Core i3 / i5 / i7 3U CompactPCI Serial The G22 is an x86 PC based embedded computer for industrial automation and railway transportation, featuring the 3rd generation Ivy Bridge Intel Core family up to the i7-3615QE processor. The SBC is perfectly suited for data-intensive applications which require high computing-power. The G22 is a versatile 4HP/3U single-board computer supporting a multitude of modern serial interfaces according to the CompactPCI Serial standard. It is thus perfectly suited for data-intensive applications which require high computing-power. The CPU card is equipped with the Intel third-generation Core i7 processor running at up to 3.3 GHz maximum turbo frequency and offering the latest multi-core processor architecture from Intel with full 64-bit support. The processor frequency can be stepped down via the BIOS to lower power consumption and make the board more suitable for high temperatures. The G22 supports the Intel Active Management technology which makes it possible to access the board via the network even when it is in soft-off or standby state. For system security, a Trusted Platform Module is available on request. The memory configuration of the G22 includes a state-of-the-art fast DDR3 DRAM which is soldered to the board to guarantee optimum shock and vibration resistance. An mSATA disk connected via a SATA channel and a microSD card device which is connected via a USB interface offer nearly unlimited space for user applications. The board delivers an excellent graphics performance. Two DisplayPort interfaces are accessible at the board front. Using an external adapter two HDMI or two DVI ports can also be realized.The standard front I/O comprises two PCIe-driven Gigabit Ethernet and two USB 2.0 ports. Serial interfaces at the rear I/O connectors are 4 USB 2.0, 4 USB 3.0, 5SATA interfaces, one DisplayPort or HDMI, 5 PCI Express x1 links, and two PEG x8 links. Up to eight Gigabit Ethernet interfaces can be implemented using a rear I/O adapter board. A board management controller provides thermal supervision of the processor and a watchdog for the operating system. The G22 operates in Windows and Linux environments as well as under real-time operating systems that support Intel's multi-core architecture. The G22 comes with a tailored passive heat sink. All components are soldered for protection against shock and vibration according to applicable DIN, EN or IEC industrystandards. Optionally, the board comes with an M12 Ethernet connector. The G22 is ready for coating so that it can be used in humid and dusty environments and has a guaranteed minimum standard availability of 7 years. Intel Core i7, 3rd generation Quad-core 64-bit processor 4 HP system master and peripheral slot PICMG CPCI-S.0 CompactPCI Serial 4 or 8 GB DDR3 DRAM soldered, ECC mSATA and microSD card slots Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2USB 2.0 Standard rear I/O: 7 PCIe, 4 USB 2.0, 4 USB 3.0, 5 SATA, DisplayPort/HDMI Rear I/O via mezzanine board: up to 8 Gigabit Ethernet Intel Turbo Boost, Hyper-Threading, AMT 8.0 Open CL support

RS3 Managed 8-port Ethernet Switch IP67 Industrial Stand-Alone Device The RS3 is a managed industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels on M12 connectors. The RS3 is an industrial, IP67 stand-alone Fast Ethernet switch. It is managed and provides eight Ethernet channels on M12 connectors. The rugged switch supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching, Quality of Service (QoS) support with four traffic classes IEEE 802.1p and three-level 802.1x security as well as the logical segmentation of ports (802.1q VLANs). The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol / link aggregation) and no data loss occurs. Its built-in test mechanisms make the RS3 an even more reliable component in the communication system. A service port is accessible at the front panel on an M12 connector, providing an easy way to configure the switch. A command line interface is available via the RS232 at the service port and over Ethernet via Telnet or Secure Shell (SSH). The switch canalso be configured via SNMP (version 3). Additionally, the service connector can be used to attach an external dongle to store or update the switch configuration. This makes it easy to exchange the unit for service purposes. The RS3 a member of the MIPIOS family of extremely rugged IP67 compliant products designed for Ethernet connectivity and highly demanding applications, e.g., for redundancy systems. The industrial-grade unit is fully compliant with EN 50155 railway standard. All components inside the enclosure are specified for -40 to +85°C operation, thus enabling the device for EN 50155 class Tx operation. Additionally, the device is is compliant with ISO 7637-2 (E-mark for automotive). Convection cooling is sufficient. There are no socketed components, hardening the box against shock and vibration. The internal electronics are prepared for conformal coating. The Ethernet switch is prepared for wall or DIN-rail mounting. Managed 8-port rugged Ethernet switch Rugged aluminum enclosure (220 x 130 x 70 mm) Fanless and maintenance-free 8 Fast Ethernet ports via M12 connectors Configuration via CLI (RS232, Telnet or SSH), SNMP ver. 3 or ext. dongle 24 VDC nom. (9 to 36 V) power supply and service interface via M12 connectors Status LEDs for ports, power and more -40 to +70(+85)°C operating temperature EN 50155 class Tx (railways) and IP67 compliant Compliant to ISO 7637-2 (E-mark for automotive)

RS2 Unmanaged 8-Port Ethernet Switch with PoE IP67 Industrial Stand-Alone Device The RS2 is an unmanaged industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels and a Gigabit uplink port on M12 connectors. The RS2 is an industrial, IP67 stand-alone Fast Ethernet switch. It is unmanaged and provides eight Ethernet channels and a Gigabit uplink port on M12 connectors. The rugged switch supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching, Quality of Service (QoS) support with four traffic classes IEEE 802.1p and three-level 802.1x security. The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (link aggregation) and no data loss occurs. Its built-in test mechanisms make the RS2 an even more reliable component in the communication system. By using an application-specific configuration EEPROM, the RS2 can act similarly to a managed switch with fixed settings. This enables features untypical for unmanaged models like 802.1p priority and port based priority, port based VLAN or IEEE 802.1q VLAN IDs. Additionally, a service port is accessible at thefront panel on an M12 connector, enabling authorized personnel to configure the switch via an SPI interface. The RS2 has two power inputs on M12 connectors, making it possible to connect a backup power source (e.g., a battery). If the primary supply fails, the unit switches to the secondary supply automatically. The unit offers Power over Ethernet (PoE) PSE functionality to supply two other devices on ports 1 and 2. The RS2 is one of the first members of the MIPIOS family of extremely rugged IP67 compliant products designed for Ethernet connectivity and highly demanding applications, e.g., for redundancy systems. The industrial-grade unit is fully compliant with EN 50155 railway standard. All components inside the enclosure are specified for -40..+85°C operation, thus enabling the device for EN 50155 class Tx operation. Additionally, the device is is compliant to ISO 7637-2 (E-mark for automotive). Convection cooling is sufficient. There are no socketed components, hardening the box against shock and vibration. The internal electronics are prepared for conformal coating. The Ethernet switch is prepared for wall or DIN-rail mounting. Unmanaged 8-port rugged Ethernet switch Rugged aluminum enclosure (220 x 130 x 70 mm) Fanless and maintenance-free 8 Fast Ethernet ports via M12 connectors Power over Ethernet (PoE) PSE (ports 1 and 2) 2x 24 VDC or 110 VDC nom. redundant power supply, service interface via M12 connectors Status LEDs for ports, PoE and switch state -40 to +70(+85)°C operating temperature EN 50155 class Tx (railways) and IP67 compliant ISO 7637-2 compliant (E-mark for automotive)

RS1 Managed 8-Port Rugged Ethernet Switch with PoE IP67 Industrial Stand-Alone Device The RS1 is a managed industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels and a Gigabit uplink port on M12 connectors The RS1 is an industrial, IP67 stand-alone Fast Ethernet switch. It is managed and provides eight Ethernet channels and a Gigabit uplink port on M12 connectors. The rugged switch supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching, Quality of Service (QoS) support with four traffic classes IEEE 802.1p and three-level 802.1x security as well as the logical segmentation of ports (802.1q VLANs). The switch is fault tolerant and restoresitself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (spanning tree protocol / link aggregation) and no data loss occurs. Its built-in test mechanisms make the RS1 an even more reliable component in the communication system. A service port is accessible at the front panel on an M12 connector, providing an easy way to configure the switch. A command line interface is available via the RS232 at the service port and over Ethernet via Telnet or Secure Shell (SSH). The switch can also be configured via SNMP (version 3). Additionally, the service connector can be used to attach an external dongle to store or update the switch configuration. This makes it easy to exchange the unit for service purposes. The RS1has two power inputs on M12 connectors, making it possible to connect a backup power source (e.g., a battery). If the primary supply fails, the unit switches to the secondary supply automatically. The unit offers Power over Ethernet (PoE) PSE functionality to supply two other devices on ports 1 and 2. The RS1 is one of the first members of the MIPIOS family of extremely rugged IP67 compliant products designed for Ethernet connectivity and highly demanding applications, e.g., for redundancy systems. The industrial-grade unit is fully compliant with EN 50155 railway standard. All components inside the enclosure are specified for -40..+85°C operation, thus enabling the device for EN 50155 class Tx operation. Additionally, the device is compliant with ISO7637-2 (E-mark for automotive). Convection cooling is sufficient. There are no socketed components, hardening the box against shock and vibration. The internal electronics are prepared for conformal coating. The Ethernet switch is prepared for wall or DIN-rail mounting. Managed 8-port rugged Ethernet switch Rugged aluminum enclosure (220 x 130 x 70 mm) Fanless and maintenance-free 8 Fast Ethernet ports via M12 connectors 1 Gigabit uplink port via M12 connector Power over Ethernet (PoE) PSE (ports 1 and 2) Configuration via CLI (RS232, Telnet or SSH), SNMP ver. 3 or ext. dongle 2x 24 VDC or 110 VDC nom. redundant power supply, service interface via M12 connectors Status LEDs for ports, power and more -40 to +70(+85)°C operating temperature EN 50155 class Tx (railways) and IP67 compliant ISO 7637-2 compliant (E-mark for automotive)

M67 1-Channel Digital Oscilloscope M-Module The mezzanine card M67 is an M-Module for acquisition of analog signals with a bandwidth of up to 10 MHz at a maximum resolution of 12 bits and a sampling frequency of up to 40 MHz. The mezzanine card M67 is a board for acquisition of analog signals with a bandwidth of up to 10 MHz at a maximum resolution of 12 bits and a sampling frequency of up to 40 MHz. Variable trigger functions allow application of the M67 as a "digital storage oscilloscope" for measurement and analysis applications. The sampling data is stored in an onboard memory buffer. After the sampling procedure this buffer can be processed by an external host. Individual signal conditioning is made by the customer using a blank prototype PCB that is plugged directly on M67 and must be ordered separately. duagon can produce individual adapters on request. The M67 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. 1 analog voltage input 40 MS/s1 2 bits resolution 25 ns acquisition/conversion time ±1 V DC measuring range 4 MB SDRAM Complex trigger logic Oversampling technology Flexible onboard signal conditioning Optical isolation