G403 Railway I/O Board for Digital I/O 3U CompactPCI Serial The G403 is a digital I/O CompactPCI Serial board especially designed for railway applications. Digital I/O for Railway The G403 is a digital I/O CompactPCI Serial board especially designed for railway applications. The card is used for input/output of digital signals with different voltage levels and ground references. It supports 16 bidirectional binary input/output channels, which are separated into four optically isolated groups. EN 50155 Compliance Its voltage range from 14.4 VDC to 154 VDC and its current output of 1 A at 24 V complies with EN 50155, which makes the board ready for immediate use in train applications. Safety Measures for Mobile Environments The four front connectors are implemented by using spring cage terminal blocks causing only low wiring outlay and supporting fast installation. The digital railway I/O supports all safety measures necessary for mobile environments like trains including voltage and temperature supervision and readback of outputs. 4HP PICMG CPCI-S.0 CompactPCI Serial (PCIe 1.0) 16 bidirectional digital I/Os Organized in 4 optically isolated groups Connected via spring cage terminal blocks Flexible I/O configuration Individual edge-triggered interrupts I/O voltage range 14.4 VDC to 154 VDC Current output 1 A at 24 V Driver support for all common operating systems -40 °C to +85 °C EN 50155 compliant
G215 UART, CAN Bus & Digital I/O Interface Board 3U CompactPCI Serial The G215 is a 3U CompactPCI Serial peripheral card offering different interface configurations for RS-232, RS-422, RS-485 UARTs, CAN bus or binary I/O. The G215 is a universal interface board based on 3U CompactPCI Serial. The physical layer can be realized for each channel individually using SA-Adapters. SA-Adapters are small universal boards providing the line drivers for legacy serial I/O, fieldbus interfaces and other I/O functions. SA-Adapters typically use 9-pin D-Sub connectors at the front panel and can also be connected to the front panel via ribbon cable. The SA concept enables adding additional I/O interfaces to the G215, enhancing flexibility regarding line transceivers and isolation requirements. Two SA-Adapters can be mounted directly on the G215, up to six more adapters need more front-panel space and can be connected to the carrier via ribbon cable. The G215 comes in a standard configuration with five predefined functions on 8 HP: two CAN interfaces, two UARTs and one 8-channel digital I/O interface. Accordingly, duagon offers a large variety of SA-Adapters that can be ordered as needed, e.g. for the UARTs. The board's I/O functions are realized by means of an FPGA, making it a very flexible and inexpensive solution for dedicated serial I/O. The card fits all purposes from a customized I/O combination to a specialized 8-port CAN card or even an intelligent I/O board with a Nios soft core on 4, 8 or 12 HP. duagon also offers an option to access further I/O signals including high-speed interfaces via rear I/O on CompactPCI Serial connectors P3 and P4. The FPGA is loaded automatically from a 4 MB serial flash after powerup. To facilitate updating, this flash is user-accessible. Configurations of up to 64 MB of DDR2 SDRAM are available to complement the functions of the FPGA. This DRAM can be used as large buffer memory for more complex protocols, for instance. The G215 is designed for use in rugged environments. For example, all components are soldered-on and are specified for an operating temperature of -40 °C to +85 °C. 5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 digital I/O port Other function combinations via FPGA IP cores For protocols/physical layers like RS232/RS422/RS485, HDLC, CAN bus, IBIS, GPS, digital I/O Physical layers via SA-Adapters -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card
G211F Quad Fiber Optics Interface Board 3U CompactPCI Serial The G211F is a rugged 3U CompactPCI Serial peripheral board for implementing four optical fiber Ethernet interfaces supporting 1000BASE-SX. Quad Fiber Optics Ethernet Board The G211F is a rugged 3U CompactPCI Serial peripheral board. It offers the possibility to implement four optical fiber Ethernet interfaces. The board is equipped with a cage for connection of four SFP transceivers. The cage hosts the optical adapter. The cables are connected to the adapter module. duagon offers an optical transceiver with LC-Duplex connectors as an accessory. The G211F can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system. 1000BASE-SX Channels All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1 Gbit/s if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface. Rugged Environments The G211F is designed for extended operating temperature and prepared for conformal coating for use in harsh and mobile environments. Four independent optical transceiver channels 1000BASE-SX Intel i82580 Server Chipset with support for 8 virtual machines Fully integrated to comply with IEEE802.3x 500 V isolation voltage -40 °C to +85 °C (without transceivers) PICMG CPCI-S.0 CompactPCI Serial peripheral card
G211X Quad Gigabit Ethernet Interface Board, M12-X 3U CompactPCI Serial The G211X quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board. Quad Gigabit Ethernet Board The G211X quad Ethernet interface is a rugged single Eurocard CompactPCI Serial peripheral board. It can be used in combination with a CompactPCI Serial or CompactPCI PlusIO CPU board in a CompactPCI Serial or hybrid system. Future-Proof Front Connectors It provides four Gigabit Ethernet interfaces at the front panel which can be accessed on four M12 X-coded connectors making it especially suited for applications in harsh environments. All four interfaces are controlled by one Ethernet controller which is connected to the backplane via a x4 PCI Express link and supports the IEEE 802.3x standard. Each interface supports a data transfer rate of 1 Gbit/s, even if all interfaces are used simultaneously. Two LEDs show the link and activity status of every interface. Perfect for Railway Applications The G211X is designed for the extended operating temperature and prepared for conformal coating for use in harsh and mobile environments, in particular for rolling stock applications. Four 10/100/1000BASE-T Ethernet channels Intel I350 Ethernet Controller with support for 8 virtual machines Full-duplex or half-duplex M12 X-coded connectors Fully integrated to comply with IEEE802.3u 500 V isolation voltage -40 °C to +85 °C PICMG CPCI-S.0 CompactPCI Serial peripheral card
D134C PC/104 CAN Interface Dual Active/Passive CAN Interface The D134C is a multi-purpose CAN interface on a PC/104 footprint supporting all CAN operating modes and baud rates. It is available in two configurations: Passive CAN interface with a CAN controller. Active CAN interface including arbitrary CAN communication stacks. It is designed for the harsh traction environment (-40°C to 70°C) and is fully compliant to the EN 50155 / EN 50121 standard. CAN 2.0 CANOpen J1939 PC/104 UART Emulation
D114L PC/104 MVB Interface Cost optimized MVB Interface The D114L board series is an interface between railway vehicle equipment and the MVB Multifunction Vehicle Bus via "Process Data" communication. The D114L is cost optimized to applications with equal or less than 16 Process Data ports. All MVB physical layers are supported (ESD+, EMD, OGF) and it fully supports MVB line redundancy. The "UART Emulation" interface allows MVB communication without the need for a real time operating system. Hardware integration is very easy (8 registers and 8-bit access are needed, only). The Platform is designed for harsh traction environment and is fully compliant to the EN 50155 standard. EMD / ESD+ PD 16 / MD PC/104 Easy-to-use UART Emulation Galvanic Isolation OGF Interface
D113 PC/104 MVB Interface Multipurpose MVB Interface Card for Railway Systems MVB Interface with Flexible Configuration The D113 is a multipurpose MVB interface card designed in a PC/104 form factor. It provides full support for the Multifunction Vehicle Bus (MVB) and complies with the TCN standard IEC 61375-3-1 up to class 4, making it suitable for a wide range of railway control and communication applications. The D113 is available in two functional configurations: process data only or process and message data; each optionally extendable with a bus administrator. MVB Controller At its core, the D113 integrates duagon's MVB Controller (DMC) implemented in an FPGA, supporting up to 4096 process data ports. The process and message data configuration includes a CPU that runs the message data stack directly on the module, offloading communication tasks from the host and reducing host CPU load compared to ASIC-based MVB interface solutions. In process data only configuration, the MVB interface is controlled directly by the host. Easy Integration into Host System To simplify system integration, the D113 offers a standardized PC/104 host interface and a wide range of hardware options, including MVB physical layer variants (ESD+, EMD), connector types, and host interface configurations. This allows the D113 to be tailored to specific system requirements. Together with duagon's multi-card host driver kit, including optimized process data drivers and application examples, the D113 can be quickly and efficiently integrated into new or existing host systems. For Rolling Stock Environments Designed for harsh rolling stock environments, the D113 meets railway requirements for temperature, humidity, vibration, and EMC. It operates reliably from –40 °C to +85 °C, features conformal coating against humidity, and provides enhanced EMI and vibration robustness in accordance with EN 50155, EN 50121, and EN 61373. Standardized PC/104 form factor for fast and proven system integration Wide range of connector and hardware options Support for MVB devices up to class 4, including bus administrator functionality, process and message data Fully compliant with EN 50155 and IEC 61375 –40 °C to +85 °C operating temperature
D017M PCI Express Mini Card MVB Interface Mini Card MVB Interface with Bus Administrator functionality MVB Interface with Flexible Configuration The D017M is an MVB interface card for PCI Express Mini systems. The module provides one line-redundant galvanically isolated interface with lines A and B. EMD or ESD+ can be chosen as physical layers. duagon's own MVB controller is implemented in an FPGA and supports all 4096 process data ports. An additional 32-bit soft processor handles the complete message data stack with an easy-to-use interface. The D017M fully complies with the TCN standard IEC 61375 up to MVB class 4. The optional bus administrator manages the complete MVB network and can be configured using the duagon D2000 network tool. To fulfill the requirements of the different applications, the physical layer of the MVB (line transceivers, galvanic isolation, power generation for MVB termination) is either included in the PCIe Mini Card or is incorporated on a dedicated PHY board. Two D-Sub connectors can also be delivered by selecting the corresponding ordering option. Host Driver & API Support The interface card is accompanied by a host driver packet, providing a unified application programming interface (API) to access the various protocols and functions. The host driver is based on a client-server model, where the host system acts as client and the D017M as server. The driver packet is available for different operating systems, such as Windows and Linux, and can easily be ported to any embedded OS. For Rolling Stock Environments The D017M is designed for harsh rolling stock environment and complies with the EN 50155 standard: it withstands -40 °C to +85 °C operating temperatures, is coated against humidity and provides enhanced EMI and vibration robustness. Space-saving through miniaturized form factor Support for MVB devices up to class 4, including bus administrator functionality, process and message data Complete MVB physical layer, including integrated terminator resistors and generators Full range of 4096 process data ports –40 °C to +85 °C operating temperature
D015M PC/30 MVB Interface Small Multipurpose MVB Interface with Bus Administrator functionality The D015M is a multi-purpose MVB interface on a 40 x 85 mm size footprint (PC/30). All features of the MVB architecture are available: Process Data, Message Data, Bus Administrator as an option and physical layer EMD or ESD+. The D015M is available in two configurations: as a passive MVB interface with a duagon MVB controller ("MDFULL") or an active MVB interface including the Message Data Real Time Protocol stack MD RTP ("SERVER"). This approach minimizes the CPU requirements of the host system, because the major part of the communication software runs on the duagon interface A handy starter-kit is available for evaluation and host-application-software development. The D015M complies with the TCN standard IEC 61375. It is designed for the harsh traction environment and conforms to the EN 50121, EN 50155 and EN 61373 standards. It operates reliably from -40 °C to +85 °C, features conformal coating against humidity, and provides enhanced EMI and vibration robustness. The D015M is not recommended for new designs. Can act as a full featured MVB Bus administrator ANSI C source files allows an easy porting to any host / operating system combination The module is compatible with EMD and ESD+ physical MVB layers The D015M conforms with the EN50121, EN50155, EN 61373 and IEC61375 standards, and is designed for the harsh traction environment Modules of this product series (D015) can easily be exchanged without adaptation of the customer's host PCB
D013E Dual Ethernet Interface Small Communication Module for Real-Time Ethernet Protocols Space-Saving Controller for Complex Ethernet Protocol Stacks The D013E is a multi-purpose dual Ethernet controller interface, available with one or two galvanically isolated 10/100 Mbit Ethernet interfaces (ETH0/ETH1). It features embedded processing power with hardware prioritization and very low jitter for reliable communication. The space-saving component encapsulates all Ethernet-relevant functions on a compact 48 x 50 mm footprint, acting as a communication chip that handles the Ethernet protocol stack independently. This lowers the requirements on the host system, as no additional CPU power is needed. Rail-Specific Network Protocols The D013E is fully compliant with IEEE 802.3 and supports 10BASE-T or 100BASE-TX, auto-crossover and autonegotiation. It supports the most commonly used real-time Ethernet train communication network protocols including TRDP, EtherNet/IP, CIP and more. The interface card provides maximum availability by supporting redundancy protocols including RSTP and dual-homing. An optional internal switch enables daisy chains and the corresponding ring protocols. Furthermore, a dedicated bypass output provides the drivers for external bypass relays, which are not part of the D013E. Web maintenance and cybersecurity features are available as options. Easy Integration into Host System With duagon's driver kit, the D013E can be integrated quickly on almost any host system through a small register set, each 8 bits long, without the wide address range required by dual-ported-memory-based solutions. The host interface, configurable by bootstrapping pins, can be operated as serial (RS/TX), 8-bit parallel, or SPI. The digital interfaces operate at 3.3 V logic levels, compatible with most modern CPU platforms. The D013E is designed for harsh rolling stock environments and is fully compliant with EN 50155. Space-saving form factor (48 x 50 x 10 mm) Proprietary Ethernet stack for process data prioritization with decreased data latency Support for most common real-time Ethernet protocols including EtherNet/IP-CIP IPTCom PROFINET and TRDP Support for redundancy protocols e.g. RSTP duagon web server for remote firmware updates -40 °C to +85 °C operating temperature range