P16 Dual 100Base-T Ethernet PC-MIP PCI Mezzanine Card The P16 is an Ethernet PC-MIP mezzanine card with two 10/100Base-T Fast Ethernet channels. The mezzanine module P16 provides dual Ethernet functionality with a 1000 V isolation for telecom applications (e. g. routers) as well as for industrial applications (e. g. second Ethernet as fieldbus). The P16 features two Intel 82559 Ethernet controllers, supporting 10/100Base-T via two RJ45 connectors at the front panel. The PC-MIP offers full-duplex support. The MAC address is stored in an onboard serial EEPROM. The P16 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from duagon or other manufacturers. Comparable with the larger foot print PMC mezzanine cards, PC-MIP boards also support PCI bus. Dual 10/100Base-T Fast Ethernet Dual Intel 82559 Controller Dual RJ45 connector Full duplex Electrical isolation -40 to +85°C screened versions

DC1 Rugged 15" Panel PC Industrial Display Computer The display computer DC1 is a rugged, fanless and maintenance-free panel PC for harsh, mobile and mission-critical applications in transportation, avionics, medical engineering and industrial automation. The display computer DC1 is a rugged, fanless and maintenance-free panel PC for harsh, mobile and mission-critical applications. Its robust stainless enclosure is protected against violent impacts and designed for, e.g., infotainment purposes in trains,public buses or airplanes. The DC1 is controlled by the Intel Atom Z530 running at 1.6 GHz. It comes with 1 GB of DDR2 SDRAM and 4 GB of USB-driven Flash disk. The standard interfaces comprise 2 Fast Ethernet and 2 USB ports as well as four binary inputs (with a fifth used for key input functionality). The two Ethernet interfaces have switch functionality to provide Ethernet connection also to subsequent intelligent displays. A temperature sensor monitors and controls the display. All I/O signals are concentrated at the bottom side of the DC1. The whole unit can be directly mounted to a VESA mount or side-by-side with a second display. The standard version of the DC1 complies with the EN 50155, class Tx railway standard. It is thus for example equipped with an internal 24 VDC nom. wide-range power supply and able to operate in a -40 to +70°C environment (+85°C for 10 minutes; -30 to +70°C for the display panel with automatic switch-off at excess temperatures). The control electronics are directly attached to the back of the screen, supporting 19", 17", 15", 12" and optionally even smaller display and housing sizes. The computer unit itself builds on the Intel ultra-mobile low-power processor family starting with the Intel Atom Z530 at 1.6 GHz or Z510 at 1.1 GHz. On request a serial interface can be added and the USB interfaces can be individually configured up to a maximum of 5 ports (alternatively serial interfaces), one of which a client port. A connection for a secondary display (onboard via LVDS or external via DVI-D) can be made accessible, with then two displays able to provide different and equal content at the same time. Additional I/O may optionally comprise HD audio or field bus functions like IBIS. A PCI Express Mini Card slot combined with an external antenna can be used to incorporate wireless functions like Wi-Fi, GSM/GPRS, etc. The concept also allows to use different input voltage ranges of the PSUs, for example 24 VDC nom. (28.8to 67.2 V), 72 VDC nom. (43.2 to 100.8 V) or 110 VDC nom. (66 to 154 V) for railway applications. With a typical power consumption of only 20 Watts for the total system the design is always realized without fans, using conductive cooling between the electronics and the display to spread the dissipated heat to the outside of the housing. All electronic components are soldered to withstand shock and vibration and prepared for conformal coating. 15" 4:3 TFT LCD panel 1024 x 768 pixels resolution Intel Atom processor 2 Fast Ethernet, 2 USB Wide-range PSU 24 VDC nom. (14.4 to 33.6 V) -40 to +85°C operating temperature Rugged aluminum enclosure Fanless and maintenance-free design IP 54compliant (front) EN 50155 compliant (railways) Windows XP Embedded image (120-day trial version)

RS4 Unmanaged 8-port Ethernet Switch IP67 Industrial Stand-Alone Device The RS4 is an unmanaged industrial, IP67 stand-alone Fast Ethernet switch that provides eight Ethernet channels on M12 connectors. The RS4 is an industrial, IP67 stand-alone Fast Ethernet switch. It is unmanaged and provides eight Ethernet channels on M12 connectors. The rugged switch supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching, Quality of Service (QoS) support with four traffic classes IEEE 802.1p and three-level 802.1x security. The switch is fault tolerant and restores itself on its own: If a link is temporarily unavailable, frames can be sent via backup/redundant links (link aggregation) and no data loss occurs. Its built-in test mechanisms make the RS4 an even more reliable component in the communication system. By using an application-specific configuration EEPROM, the RS4 can act similarly to a managed switch with fixed settings. This enables features untypical for unmanaged models like 802.1p priority and port based priority, port based VLAN or IEEE 802.1q VLAN IDs. Additionally, a service port is accessible at the front panel on an M12 connector, enabling authorized personnel to configure the switch via an SPI interface. The RS4 is a member of the MIPIOS family of extremely rugged IP67 compliant products designed for Ethernet connectivity and highly demanding applications, e.g., for redundancy systems. The industrial-grade unit is fully compliant with EN 50155 railway standard. All components inside the enclosure are specified for -40 to +85°C operation, thus enabling the device for EN 50155 class Tx operation. Additionally, the device is compliant with ISO 7637-2 (E-mark for automotive). Convection cooling is sufficient. There are no socketed components, hardening the box against shock and vibration. The internal electronics are prepared for conformal coating. The Ethernet switch is prepared for wall or DIN-rail mounting. Unmanaged 8-port rugged Ethernet switch Rugged aluminum enclosure (220 x 130 x 70 mm) Fanless and maintenance-free 8 Fast Ethernet ports via M12 connectors 24 VDC nom. (9 to 36 V) power supply and service interface via M12 connectors Status LEDs for ports and switch state -40 to +70(+85)°C operating temperature EN 50155 class Tx (railways) and IP67 compliant ISO 7637-2 compliant (E-mark for automotive)

F212U Triple USB 2.0 Interface Board 3U CompactPCI The F212U is a rugged single Eurocard CompactPCI board with three USB 2.0 interfaces at the front. The F212U is a rugged single Eurocard CompactPCI board with three USB 2.0 interfaces at the front. The interfaces support OHCI and EHCI. The F212U is designed for -40°C to +85°C operation temperature (screened) and prepared for conformal coating in order to be used also in harsh and mobile environments. It is an ideal extension of a CompactPCI Intel or Power PC system if the USB interfaces provided by the CPU board or the side card are not sufficient. 3 USB 2.0 interfaces 32-bit/33-MHz CompactPCI -40 °C to 85 °C

F211 Quad Fast Ethernet Interface Board 3U CompactPCI The F211 is a single Eurocard CompactPCI networking controller with four Fast Ethernet channels. The F211 is a single Eurocard CompactPCI networking controller that needs only one slot on the CompactPCI bus. The four Fast Ethernet channels on one card occupy four individual MAC/IP addresses. They support full-duplex or half-duplex with 10Base-T and100Base-TX physical layers for distances up to 100 m. Featuring auto-negotiation, collision and link detection the maximum data transfer rate per channel is 200 Mbit/s with full-duplex operation. The Ethernet channels on the F211 can be used individually as well as in redundant mode for high-availability systems by using some of the Ethernet ports in parallel. The F211 has been designed for rugged and mobile applications with demand for multiple network controllers such as firewalls, gateways, routers,or as a fieldbus data concentrator based on industrial Ethernet. The F211 is qualified for extended operation temperature and prepared for conformal coating for use in harsh and mobile environments. 4 HP 32-bit/33-MHz CompactPCI 4 full-duplex or half-duplex channels 10BASE-T and 100BASE-TX physical layer Fully integrated to comply with IEEE802.3u 1500 V isolation voltage -40 °C to +85 °C

F223 Wireless Network Board for 2 PCIe and 2+16 SIM Cards 3U CompactPCI F223 is a rugged 3U CompactPCI carrier for wireless functions like WLAN, WAP, UMTS, GPS, GSM, HSDPA, LTE supporting PCIe Mini Cards and up to 18 SIM cards Wireless Functionality The F223 is a rugged single Eurocard CompactPCI carrier board supporting the PCI Express Mini Card standard. The standard version of the F223 offers two PCI Express Mini Card slots with USB and PCI Express connection. It allows to use all types of cards for wireless applications making it possible to extend the functionality of a CompactPCI system in the same fast and easy way as a common notebook. It is possible to reset and power on and off the two PCI Express Mini Cards separately without having to reset the whole system. Flexible Antenna Configuration at the Front Different front panels are available as an accessory so that each PCI Express Mini Card can be connected to a flexible number of robust redundant external antenna connectors at the front. Large Number of SIM Cards Using a plug-on adapter board as many as eight additional SIM cards per PCI Express card can be implemented. Even with the adapter assembled the board still only needs a width of 4 HP. Another option is to equip the board with a USB-SIM emulator for controlling SIM cards on a central server. For Harsh and Mobile Environments The F223 is designed for -20 °C to +85 °C operating temperature and is conformally coated in order to be used also in harsh and mobile environments. The final environmental qualification depends on the respective cards used on the carrier. 2 PCI Express Mini Cards (full-/half-size) For wireless applications (WLAN/WAP, UMTS, GPS, GSM, HSDPA, LTE) 2 or 3 external antennas per module (reverse SMA) Different standard front panels available Up to 18 SIM card slots -20 °C to +85 °C, conformal coating 4 HP 32-bit/33-MHz CompactPCI

G501 SATA HDD/SSD Shuttle 3U CompactPCI Serial The G501 is a CompactPCI Serial hard disk drive carrier board designed to carry a 2.5" SATA hard disk drive or a solid state drive. 2.5" HDD or SSD The G501 is a CompactPCI Serial hard disk drive carrier board. It is designed to carry a 2.5" SATA hard disk drive (RAID level depending on the CPU) or a solid state drive. Front Panel Status LEDs The unit's front panel features LEDs that signalize the board's SGPIO status while a fourth indicates the status of the internal controller's power supply. Suitable for Railway Applications Its compliance with the EN 50155 standard makes the board suitable for use in railway applications. Hard disk drive or solid state drive shuttle 2.5" SATA HDD/SSD slot Four status LEDs -40 °C to +85 °C Compliant with EN 50155 (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card

GX1 PCI Express Switch or Switch Fabric Board 3U CompactPCI Serial The GX1 is a 16-port or 17-port PCI Express gen 3 switch or switch fabric for multi-CPU high speed video and image processing, supercomputing and routing applications - only available in a project context. The GX1 offers a cost-effective PCIe Gen 3 switching solution via the CompactPCI Serial backplane. It comes with Express Switch or Express Fabric functionality. Some typical industrial applications include multi-CPU high speed video and image processing, supercomputing and virtualization. The GX1's final configuration depends on the end application. It is only available within a project context and cannot be ordered as a single standard product. High-Speed Connection The GX1 enables high speed serial point-to-point communication between the CPUs and between the CPUs and end point modules. Configurable data transfer rates can reach up to 985 MB/s per PCIe lane. Flexible Configuration of Multi-Processor Systems The switch allows connection of multiple endpoints and multiple CPUs. This way, it is possible to build powerful and cost-effective multi-processor systems. The switch ports can be configured flexibly using an application running on the root complex CPU. This way, the switch can be adapted to different backplane designs. No programming is required to set up the ports. Setup and diagnostics tools are available from the chip manufacturer. Express Switch Functionality The GX1 supports both multi-root and multi-host configuration. For multi-root configuration, the GX1 can be partitioned into four fixed virtual bridges supporting up to four root complexes. Each root complex is allowed to enumerate its own endpoints. Non-transparent bridging is not required in this case. For multi-host configuration, the primary host CPU is acting as a root complex enumerating all the endpoints and up to two additional secondary host CPUs connected over two non-transparent bridges. In this configuration, all host CPUs are able to communicate with all endpoints. Using the non-transparent bridging the primary CPU is able to share control, status and interrupt information with the secondary hosts. This allows more efficient load sharing in data intensive computing applications. Express Fabric Functionality GX1 can also be equipped with an Express Fabric chip which is especially suitable for complex non-hierarchical PCI Express topologies such as Mesh and Fat Tree. It supports single-root I/O virtualization which means that I/O can be shared among multiple hosts similar to the way Virtual Machines (VMs) share a piece of hardware on the same host. Express Fabric makes it possible to use more than 3 CPU boards in one configuration. The hosts communicate via Ethernet-like DMA. 64-Lane, 16-Port Express Switch or 65-Lane, 17-Port Switch Fabric PCI Express Generation 3 switching over CompactPCI Serial 985 MB/s per lane for each point-to-point serial link Programmable configuration of PCIe ports according to backplane design Software tools for diagnostics and performance monitoring Dedicated upstream links for multiple CPUs Multicast / broadcast capability Product configuration depending on project

G303 Unmanaged 16-Port Industrial Ethernet Switch 3U CompactPCI Serial The G303 is an unmanaged rugged industrial Gigabit Ethernet switch implemented as a CompactPCI Serial board with up to 16 Ethernet ports. Unmanaged Industrial Ethernet Switch The G303 is an unmanaged 3U Ethernet switch implemented as a CompactPCI Serial board. It occupies one peripheral slot, using a 4 HP front panel with 3 Gigabit Ethernet ports on RJ45 or M12 connectors. The G303 either features three Ethernet ports on the front and up to 13 Ethernet ports on the rear or alternatively all 16 Ethernet ports on the rear, which is the ideal solution for conduction cooling. Reliable Communication System Component The G303 supports full-duplex and half-duplex operation with auto-negotiation, high-speed non-blocking store-and-forward switching. Its built-in test mechanisms make the G303 an even more reliable component in the communication system. Using the EEPROM, the port speed and duplex can be configured, and the port-based VLAN-IDs can be assigned. Compliant to Railway Standards The railway Ethernet switch is specifically designed for rugged mobile communication systems and fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating. Unmanaged 16-port rugged Ethernet switch Up to 16 Gigabit Ethernet ports on rear I/O Or 3 ports on front and up to 13 ports on rear LEDs for front port and board states -40°C to +85°C EN 50155 class TX compliant (railways) PICMG CPCI-S.0 CompactPCI Serial peripheral card

G304 Unmanaged 4-Port Industrial Ethernet Switch with PoE+ 3U CompactPCI Serial The G304 is an unmanaged rugged industrial Gigabit Ethernet switch implemented as a CompactPCI Serial board with 4 Gigabit Ethernet ports on RJ45 or M12 connectors. Unmanaged Industrial Ethernet Switch The G304 is an unmanaged 3U Ethernet switch implemented as a CompactPCI Serial board. It occupies one peripheral slot, using a 4 HP front panel with 4 Gigabit Ethernet ports on RJ45 or X-coded M12 connectors, and one direct Ethernet connection to the CPU card using PCI Express on P1. A P6 connector can optionally extend the number of Ethernet channels available on the board to six. Reliable Communication System Component The G304 supports full-duplex and half-duplex operation with auto-negotiation, high-speed nonblocking store-and-forward switching. Its built-in test mechanisms make the G304 an even more reliable component in the communication system. In addition, the switch can act as Power over Ethernet Plus (PoE+) Power Sourcing Equipment (PSE), supplying other devices on all ports with up to 30 W (class 0, 1, 2, 3, 4) per port for power according to IEEE 802.3 Section 2 - Type 1 and 2 (formerly known as IEEE 802.3at). The maximum power available for one G304 is limited to 61.6 W, according to CPCI-S.0 specification. Compliant to Railway Standards The board is specifically designed for rugged mobile communication systems. It is, for example, compliant with the EN 50155 railway standard, supports a -40 °C to +85 °C operating temperature and rail-ready versions are coated. Unmanaged 4-port rugged Ethernet switch 4 Gigabit Ethernet on RJ45 or M12 X-coded Power over Ethernet (PoE+) PSE (all ports) LEDs for link and activity status 1 Gigabit Ethernet on rear I/O (optional) -40 °C to +85 °C EN 50155 (rolling stock) PICMG CPCI-S.0 CompactPCI Serial