GP2 - 4-Port Gigabit SFP PHY Line Card

The GP2 is a 3U Gigabit Ethernet PHY line card implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on SFP cages.

The GP2 is designed to work in combination with the G101 CompactPCI Serial managed industrial Ethernet switch.

The GP2 provides four cages for 100BASE-FX, 1000BASE-SX, 1000BASE-LX and 1000BASE-ZX SFP modules. Each interface supports a data transfer rate of 1 Gbit/s max, and provides two LEDs to indicate the link and activity status.

The GP2 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating.

Features

  • 100/1000 Mbit/s SFP modules supported
  • FX / SX / LX / ZX modules supported
  • 4 SFP cages
  • LEDs for link and activity status
  • -40 to +85°C with qualified components
  • EN 50155 classTx (railways)
  • PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)

Specifications

Key Features
Four 100/1000 Mbps SFP cages at front panel
Supported Protocols and Standards
IEEE 802.3 standard
Tested SFP Types
  • CISCO GLC-SX-MM, 1 Gbps BASE-SX, 220/500 m, 0 to +70°C
  • AVAGO ABR-5710 ALZ, 1 Gbps BASE-SX, 250/550 m, -40 to +85°C
  • Finisar FTLF8519P3BTL, 1 Gbps BASE-SX, 300/500 m, -40 to +85°C
  • Finisar FTLF1318P3BTL, 1 Gbps BASE-LH, 10 km, -40 to +85°C
  • Finisar FTLF1518P1BTL, 1 Gbps BASE-ZX, 80 km, -40 to +85°C
  • AVAGO ABR-57R5APZ, 4.25 Gbps BASE-SX, 300 m @ 2.125 Gbps, -10 to +85°C
Front Interfaces
  • Ethernet
    • Four SFP slots, 1000BASE-SX/LX/ZX (1 Gbit/s)
  • Status LEDs
    • Two LEDs for each SFP slot
    • Signal link status
    • Signal link activity
Rear Interfaces
  • Serial GPIO (SGPIO)
  • Quad Serial Gigabit Interface (QSGMII)
Backplane Standard
CompactPCI Specification PICMG CPCI-S.0
  • Peripheral slot with extensions (QSGMII)
Supervision and Control
  • BITE Voltage Supervision
  • Voltage monitoring
Electrical Specifications
  • Supply voltages
    • +12 V (±10%)
  • Power consumption
    • 5 W (max. 15 W depending on SFP modules)
Mechanical Specifications
  • Dimensions: 3U, 4 HP
  • Weight: 136 g
Environmental Specifications
  • Temperature range (operation):
    • -40°C to +85°C
    • Airflow 1.5m/s
  • Temperature range (storage): -40°C to +85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +2000 m
  • Shock: 50 m/s², 30 ms
  • Vibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
  • Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
  • Conformal coating on request
Reliability
MTBF: 250.000 h @ 40°C according to IEC/TR 62380 (RDF2000)
Safety
  • Flammability (PCBs)
    • UL 94 V-0
  • Electrical Safety
    • EN 50155 (Insulation)
    • EN 50155 (Voltage)
EMC
  • EN 55022 (radio disturbance)
  • EN 61000-4-2 (ESD Immunity)
  • EN 61000-4-4 (burst)