GP2 - 4-Port Gigabit SFP PHY Line Card

GP2 Gigabit Active Port Adapter Card for SFP Modules

NH30 - Rugged 4U, 40 HP Modular Managed Gigabit Ethernet Switch

The GP2 is a 3U Gigabit Ethernet PHY line card implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on SFP cages.

The GP2 is designed to work in combination with the G101 CompactPCI Serial managed industrial Ethernet switch.

The GP2 provides four cages for 100BASE-FX, 1000BASE-SX, 1000BASE-LX and 1000BASE-ZX SFP modules. Each interface supports a data transfer rate of 1 Gbit/s max, and provides two LEDs to indicate the link and activity status.

The GP2 operates with a primary voltage supply of +12 V, which is provided via the rear CompactPCI serial connector. All additional required voltages are generated onboard. It is fully compliant with the EN 50155 railway standard, qualified for a -40 to +85°C operation temperature and ready for coating.

100/1000 Mbit/s SFP modules supported
FX / SX / LX / ZX modules supported
4 SFP cages
LEDs for link and activity status
-40 to +85°C with qualified components
EN 50155 classTx (railways)
PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)

Key Features

Four 100/1000 Mbps SFP cages at front panel

Supported Protocols and Standards

IEEE 802.3 standard

Tested SFP Types

CISCO GLC-SX-MM, 1 Gbps BASE-SX, 220/500 m, 0 to +70°C
AVAGO ABR-5710 ALZ, 1 Gbps BASE-SX, 250/550 m, -40 to +85°C
Finisar FTLF8519P3BTL, 1 Gbps BASE-SX, 300/500 m, -40 to +85°C
Finisar FTLF1318P3BTL, 1 Gbps BASE-LH, 10 km, -40 to +85°C
Finisar FTLF1518P1BTL, 1 Gbps BASE-ZX, 80 km, -40 to +85°C
AVAGO ABR-57R5APZ, 4.25 Gbps BASE-SX, 300 m @ 2.125 Gbps, -10 to +85°C

Front Interfaces

Ethernet
- Four SFP slots, 1000BASE-SX/LX/ZX (1 Gbit/s)
Status LEDs
- Two LEDs for each SFP slot
- Signal link status
- Signal link activity

Rear Interfaces

Serial GPIO (SGPIO)
Quad Serial Gigabit Interface (QSGMII)

Backplane Standard

CompactPCI Specification PICMG CPCI-S.0

Peripheral slot with extensions (QSGMII)

Supervision and Control

BITE Voltage Supervision
Voltage monitoring

Electrical Specifications

Supply voltages
- +12 V (±10%)
Power consumption
- 5 W (max. 15 W depending on SFP modules)

Mechanical Specifications

Dimensions: 3U, 4 HP
Weight: 136 g

Environmental Specifications

Temperature range (operation):
- -40°C to +85°C
- Airflow 1.5m/s
Temperature range (storage): -40°C to +85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +2000 m
Shock: 50 m/s², 30 ms
Vibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)

Reliability

MTBF: 250.000 h @ 40°C according to IEC/TR 62380 (RDF2000)

Safety

Flammability (PCBs)
- UL 94 V-0
Electrical Safety
- EN 50155 (Insulation)
- EN 50155 (Voltage)

EMC

EN 55022 (radio disturbance)
EN 61000-4-2 (ESD Immunity)
EN 61000-4-4 (burst)

GP2 - 4-Port Gigabit SFP PHY Line Card

Features

NH30Rugged Fully Managed 29 Gbit/s Ethernet Switch

GE14-Port Gigabit Copper Ethernet Line Card with PoE

GP14-Port Gigabit Ethernet PHY Line Card with PoE

G101Fully Managed 29 Gbit/s Industrial Ethernet Switch, A-Coded

G102Fully Managed 29 Gbit/s Industrial Ethernet Switch, X-Coded

Specifications

Standard Models

Software

Documentation

Markets

Products

Company

Whistleblower Line

Follow Us