P16 - Dual 100Base-T Ethernet PC-MIP (Product Discontinued)

The mezzanine module P16 provides dual Ethernet functionality with a 1000 V isolation for telecom applications (e. g. routers) as well as for industrial applications (e. g. second Ethernet as fieldbus).

The P16 features two Intel 82559 Ethernet controllers, supporting 10/100Base-T via two RJ45 connectors at the front panel. The PC-MIP offers full-duplex support. The MAC address is stored in an onboard serial EEPROM.

The P16 is based on the PC-MIP ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate PC-MIP carrier cards in 3U, 6U and other formats are available from MEN or other manufacturers. Comparable with the larger foot print PMC mezzanine cards, PC-MIP boards also support PCI bus.

Features

  • Dual 10/100Base-T Fast Ethernet
  • Dual Intel 82559 Controller
  • Dual RJ45 connector
  • Full duplex
  • Electrical isolation
  • -40 to +85°C screened versions

Specifications

Ethernet Interface
  • Two 10/100Base-T interfaces
  • Two 82559ER controllers
  • Full duplex support
  • Media Access Control (MAC) address stored in onboard serial EEPROM
PCI Characteristics
  • 32-bit PCI, complying with PCI Local Bus Specification, Rev. 2.1
  • Target and initiator
Peripheral Connection
Via front panel on two standard 8-pin RJ45 receptacle connectors
Electrical Specifications
  • Isolation voltage: 1kV RMS (0..1000m above sea level)
  • Supply voltage/power consumption:
    • +3.3V (3.0V..3.6V), 300mA typ., 450mA max.
  • MTBF: 490,000h @ 50°C (derived from MIL-HDBK-217F)
Mechanical Specifications
  • Dimensions: PC-MIP Type II conforming to PC-MIP Standard
  • Weight: 30g
Environmental Specifications
  • Temperature range (operation):
    • 0..+60°C
    • Industrial temperature range on request
    • Airflow: min. 10m³/h
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 2g/10..150Hz
  • Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)
Software Support