The SA18 provides the transceiver part of a USB 1.1 interface, using a standard type A connector and connected by a ribbon cable.
SA-Adapters are small universal boards providing the physics for legacy serial I/O, fieldbus interfaces and other small I/Ofunctions. One serial line is provided per adapter, which can be plugged directly to the CPU board as a mezzanine. Alternatively, the adapter can be connected to the front panel via ribbon cable. The SA concept allows to add additional I/O interfaces to many of MEN's CPU boards, enhancing flexibility with regard to the line transceivers and isolation requirements. Whether a specific SA-Adapter (or a mix of different SA-Adapters) fits on a specific CPU board is determined by a combination of mechanical, performance, FPGA and operating system criteria and needs to be verified for every board configuration requested.
Features
1 USB 1.1 channel
Standard USB connector (Type A)
Specifications
Interface
USB 1.1
Data rates up to 12Mbit/s
OHCI implementation
Up to 127 devices controlled by one controller
Support of all transfer modes (control, interrupt, bulk, isochronous)
Self powered hub functionality
Peripheral Connection
Type A connector at front panel
Power line pin overcurrent limited and fused against short cicuit
Thermal shutdown
Nominal load 5 USB units (5V/0.5A)
Data signal lines protected from transient voltages