The G100 is used in combination with the F100 to connect a CompactPCI Serial system to a CompactPCI system. The CompactPCI Serial backplane and the CompactPCI backplane can either be located in one housing or in two separate ones.
The G100 is plugged into a peripheral slot of a CompactPCI Serial system and is connected to the F100 via a PCI Express cable at the front which can have a length of up to 7 m. The F100 functions as the system slot in the CompactPCI system.
The G100 uses one PCI Express x1 link from the backplane and leads it to the front to an 18-pin PCI Express connector.
The board is qualified for operation in the extended temperature range of -40°C to +85°C.
For operation together with F100 system slot card for CompactPCI
1 PCI Express x1 link
-40°C to +85°C with qualified components
PICMG CPCI-S.0 CompactPCI Serial peripheral card
Used in combination with F100 as an interface from a CompactPCI Serial system to a CompactPCI system
One x1 link on 18-pin front connector
According to PCI Express Cabling Specification Rev. 1.0
PCI Express buffer
For decoupling the backplane PCI Express interface from the front interface
Data rate up to 250 MB/s in each direction (2.5 Gbit/s per lane)
Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification
Host connection: One PCI Express x1 link
Supply voltage/power consumption:
+12V (-10%/+10%), 50 mA typ.
Dimensions: conforming to CompactPCI Serial specification for 3U boards