D442 - MVB Diagnostic System

MVB Diagnostic System

Features

  • EMD / ESD+
  • MVB Monitor
  • MVB Bus Administrator
  • 4096 PD Ports
  • MD-Stack
  • USB
  • Free Programming
  • Powered over USB

The D442 diagnostic system is an interface to railway vehicle equipment by the means of the MVB (Multifunction Vehicle Bus) as defined in the TCN standard IEC61375.

The intention of the D442 diagnostic system is:

  • Handle data traffic on the MVB side as an active node like the "normal" bus nodes.
  • Perform the bus administrator function, with all functions as specified in the TCN standard: e.g. Bus Mastership Transfers, Event Arbitration, Device Status Polling, etc.
  • Support the user with several automatic functions, like scan and learn functions.
  • Act as manager for network management, i.e. perform MVB download of duagon devices.

It can operate either in mode MONITOR, which provides a complete set of interactive commands on a PC terminal console.

In mode SERVER the user application can be programmed and executed on a PC using a full featured MVB library.

 Downloads

Further Products

D504 - CAN to Ethernet Gateway

  • TCP/IP, UDP
  • IPTCOM / TRDP
  • CIP, PROFINET
  • CAN 2.0

D543 - Sibas PN to MVB Gateway

  • Hardware prioritisation within the duagon own Ethernet controller
  • Full featured message data communication
  • Full range of 4096 process data ports
  • High flexibility for the software development due to the available APIs

D547 - Sibas PN to Ethernet Gateway

  • Hardware prioritisation within the duagon own Ethernet controller
  • Encapsulation of real-time Ethernet protocol stacks
  • High flexibility for the software development due to the available APIs
  • Eliminates the need for an external power supply

DAXIO3410M - MVB Analog I/O Module

  • MVB EMD/ESD+
  • 3x Analog Input
  • 4x Digital Output
  • 16x Digital Input

D134E - PC/104 Ethernet Interface

  • TCP/IP, UDP
  • IPTCom/TRDP
  • CIP, PROFINET
  • Webserver

i202 - Digital Input / Output Module

  • 8 Digital HCI Inputs
  • 8 Digital Outputs
  • Frequency Measurement
  • PWM

i214 - Analog Input Output Module

  • 3 analog outputs, individually configurable as voltage or current output
  • 6 analog inputs, individually configurable as voltage or current input
  • Provides an auxiliary 15V power supply output
  • Condition Monitoring" to detect overtemperature

D501/D502 Development Kit

  • - Phoenix Contact Plug with cable for power supply
  • - USB to Serial (RS232)
  • - Service Interface Adapter Print
  • - Ethernet Cable M12 to RJ45