D547 - Sibas PN to Ethernet Gateway

PROFINET to Ethernet gateway with Sibas PN

Features

  • Hardware prioritisation within the duagon own Ethernet controller
  • Encapsulation of real-time Ethernet protocol stacks
  • High flexibility for the software development due to the available APIs
  • Eliminates the need for an external power supply
  • Power interruption class S2
  • Fully compliant to IEEE 802.3, EN 50155, EN 50121, IEC 61373 and IEC 61375
  • Space-saving and robust design (IP 30)

The D547 is a compact PROFINET to Ethernet gateway with Sibas PN services. The integrated Ethernet controllers, designed by duagon, feature hardware prioritisation and very low jitter. The PROFINET interface offers a full-featured 3-port switch to enable ring topologies and daisy-chaining. Furthermore, the bypass relays ensure the ring topologies integrity in case of malfunction.

The Ethernet interface is prepared for the “Ethernet on traction vehicles” standard IEC 61375-3-4. It supports various Ethernet protocols such as TRDP, CIP, IPTCom, UDP or TCP/IP.

Both the PROFINET and the Ethernet interfaces are fully complaint with IEEE 802.3 and supports features like Auto- Polarity, Auto-Negotiation and Auto-MDI-X.

The gateway is equipped with a 32-bit embedded softcore processor, that handles the Ethernet communication stacks and the gateway application.

The gateway integrates the magnetics with a galvanic isolation of 1.5kVrms, the PHY and the complete Ethernet protocol controller.

A software development library with an easy to use API to the PROFINET and Ethernet interface is provided and offers a high flexibility to the designer of the gateway application using standard C language. The gateway is delivered with a demo application to support the development.

The D547 is powered directly from the train battery (24V to 110V, wide range power supply). There is no need for an additional external power supply.

The D547 fulfils the Safety Integrity Level 0 defined by EN 50128 and EN 50129 and is designed for harsh rolling stock environments.

Further Products

D210 - MVB Repeater

  • EMD, ESD+, Mixed
  • Redundant
  • 24-110Vdc

D412 - MVB Diagnostic System

  • EMD / ESD+
  • MVB Monitor
  • MVB Bus Administrator
  • 4096 PD Ports

D429E - Event Recorder

  • CAN 2.0
  • MVB EMD/ESD+
  • RS232
  • RS485

D521 WTB to MVB Gateway

  • Fritting without additional DC/DC converters
  • Configurable strong master, weak master and slave node
  • Cable redundancy Line A and Line B
  • Comparably small form factor

D523 WTB to CAN Gateway

  • Dual MAU & Fritting
  • CAN Interface
  • IEC 61131
  • 24 - 110Vdc

DIO101 - Sibas PN I/O

  • Programmable digital I/O module
  • SIL2

D015C - PC/30 CAN Interface

  • CAN 2.0
  • CANopen
  • PC/30, 40 x 85 mm
  • Serial / Parallel Bus

D015M - PC/30 MVB Interface / MVB Card

  • EMD / ESD+
  • MVB Bus Administrator
  • 4096 PD ports
  • MD-Stack

D296 - MVB Terminator

  • The D296 are terminators for the MVB lines.
  • They are delivered as pair (male / female) and available for MVB physical layer EMD and ESD+.
  • • EMD: D296.T
  • • ESD+: D296.D