CT7 - Rear I/O Transition Module for D9 (Product Discontinued)

The CT7 is a 6U CompactPCI rear I/O transition module for use in combination with MEN's 6U Intel-based CompactPCI single-board computers.

It is plugged onto J3/J4/J5 of the CompactPCI backplane system slot from the rear side and leads the rear I/O signals to standard connectors. Consequently, standard cables can be used to connect drives and other peripherals.

If a hard disk is mounted (instead of a CompactFlash card), the 4HP transition module extends to 8HP, doing then also without one of the two PIM slots.

Features

  • 6U / 80 mm standard format
  • 2 Gigabit Ethernet
  • 2 USB 2.0
  • 2 UARTs
  • Up to 2 PIM slots
  • CompactFlash
  • External battery

Specifications

Peripheral Connections
  • 1 PIM interface
  • 2 USB
  • 2 Gigabit Ethernet
  • 2 COMs
  • 1 port for CompactFlash
Miscellaneous
  • External battery
  • Reset button
  • 4 user-defined LEDs (FPGA-controlled)
Electrical Specifications
MTBF: 12,666,280h @ 40°C according to IEC/TR 62380 (RDF 2000)
Mechanical Specifications
  • Dimensions: 6U width, 80mm depth, 4HP height (8HP with 2.5" hard disk)
  • Conforming to CompactPCI Specification 2.0 R2.1 for rear panel I/O boards
  • Conforming to IEEE1101.11, draft 5.0
  • Weight: 246g (with two SA-Adapters)
Environmental Specifications
  • Temperature range (operation):
    • 0..+60°C
    • Airflow: min. 10m³/h
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 3,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 2g/10..150Hz
  • Conformal coating on request
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)