CT14 - Transition Module for D602

The CT14 is a 6U CompactPCI transition module for use in combination with MEN's D602 single-board computer.

It is plugged onto the CompactPCI backplane system slot from the rear side and leads the rear-panel serial I/O signals to standard connectors.

The signals are one RS232 UART, various signals from the two PMC slots (standard rear I/O from PMC1, AFDX from PMC2), the necessary signals for inter-board communication when connecting a second D602 (BMCX, DEX (6x UART), ACTIVE_THIS/OTHER) and various debug signals (/COM_FAIL, DI_PSU_STATUS, N_TEST and the AUX_IO signals).

It also offers a reset button, a boot switch, five LEDs for the N_TEST signals from the D602's NorthFPGA and five rotary switches allowing the /COM_FAIL, DIT_XTRL, DIT_SW_OVER, DIT_WDCTRL and DI_PSU_STATUS signals to be pulled low with an option to connect /COM_FAIL to +3.3V.

The board is designed for an operating temperature from -40 to +85°C with qualified components.

Features

  • 6U / 80 mm standard format
  • 1 RS232 interface
  • DEX (6x UART)
  • BMCX signals
  • AFDX signals
  • Debug signals
  • PMC I/O
  • -40 to +85°C qualified

Specifications

Peripheral Connections
  • RS232 UART interface
    • 9-pin D-Sub connector
  • Inter-board connection to other D602
    • BMCX signals
    • DEX (6x UART) signals
    • ACTIVE_THIS/OTHER signal
    • All via 44-pin HD-Sub connector
  • Rear I/O signals from PMC1
    • Via 64-pin connector
  • AFDX signals from PMC2
    • 2 RJ45 connectors
  • Miscellaneous signals
    • N_TEST
    • AUX_IO
    • DI_PSU_STATUS
    • /COM_FAIL
    • ACTIVE_THIS/OTHER signal
    • All via 24-pin connector
Switches/buttons
  • 5 rotary switches the following allowing signals to be pulled low:
    • DIT_SW_OVER
    • DIT_WD_CTRL
    • DIT_XTRL
    • DI_PSU_STATUS
    • /COM_FAIL (connection to +3.3V possible)
  • Boot switch
    • Flip switch to choose between boot images
  • Reset button
LEDs
N_TEST signal LEDs
  • 5 LEDs on PCB
Mechanical Specifications
  • Dimensions: 233,35x80 mm conforming to CompactPCI specification for 6U boards
  • Weight: 186 g
Environmental Specifications
  • Temperature range (operation):
    • -40..+85°C
    • Airflow: min. 1.5m/s
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300m to + 20,000m
  • Shock: 15g/11ms
  • Bump: 10g/16ms
  • Vibration (sinusoidal): 1g/10..150Hz
  • Conformal coating on request
MTBF
tbd @ 40°C according to IEC/TR 62380 (RDF 2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Conforming to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)