Sie verwenden den Internet Explorer
Wechseln Sie Ihren Browser für mehr Sicherheit, Geschwindigkeit und den besten Komfort auf dieser Seite.
435
Treffer
409223 RIO2011 RIO2011 RIO I/O Expansion Module The RIO2011 has been proven to survive the rigors required for Railway Vehicles including: Electrical surges and transients of EN 50155 / EN 50121-3-2.
49117 08SA24M SA24M IBIS Master SA-Adapter The SA24M is an IBIS master interface adapter with one IBIS master interface. The SA24M provides one IBIS master interface with an external 24V supply. While
3437 08SA03- SA3 RS232 Interface Adapter SA-Adapter The SA3 is a 1-channel RS232 interface adapter with optical isolation. The SA3 is a 1-channel RS232 interface adapter with optical isolation. SA-Ada
3470 15P506- P506 Quad CAN Bus Interface PMC PCI Mezzanine Card The P506 is a mezzanine PMC with four CAN interfaces supporting CANopen and CAN Layer 2. The P506 is a 32-bit/33MHz PMC with four CAN in
409610 D201 D201 ISA to PC/104 adapter D201 is a ISA to PC/104 bus adapter. It is intended mainly for lab use. The D201 is foreseen to be used together with the -P4C „carrier mounting option“ of duago
409651 D134C D134C PC/104 CAN Interface The D134C is a multi-purpose CAN interface on a PC/104 footprint supporting all CAN operating modes and baud rates. It is available in two configurations: Pass
409211 D114RS D114RS RS485-Interface The D114RS is a multi-purpose RS485 interface with embedded processing power. It provides two RS485, one female and one male, SUB-D connectors. The interfaces are
409210 D114L D114L PC/104 MVB Interface The D114L board series is an interface between railway vehicle equipment and the MVB Multifunction Vehicle Bus via "Process Data" communication. The D114L is co
409207 D113 D113 PC/104 MVB Interface The D113 is a multi-purpose MVB interface platform on a PC/104 footprint with enhanced processing power. duagon's own MVB controller is implemented on FPGA and su
409214 D507 D507 Protocol Translator Ethernet-to-Ethernet Gateway The D507 is an easy to configure Ethernet-to-Ethernet gateway with two Ethernet interfaces ETH0 and ETH1 on M12 connectors. This enabl
Zurück nach oben