XC6 - ESMini COM Carrier Board for 3.5" PCs

XC6 ESMini COM Carrier Board - front connectors

The XC6 is an ESMini carrier that can be used together with any type of ESMini module. It provides a PCI Express Mini Card slot with SIM card holder for wireless applications. A USB Flash disk slot and a microSD card slot as well as a SATA connector foran external hard disk allow a further extension of the storage capacity. As graphics the XC6 provides a DVI-I connector. As I/O the XC6 offers 2 Fast Ethernet, 4 USB host ports (one also configurable as a client), audio in and out, a configurable RS232/RS422/RS485 interface on a 9-pin D-Sub connector, a TTY interface for a modem, eight GPIO lines with +5V level and 16 GPIO lines with 3.3V level. The I/O of the XC6 can be extended by connecting an SA-Adapter to the +5V GPIO connector, e.g. for IBIS or CANbus functionality.

Its dimensions correspond to a 3.5" PC.

1 ESMini computer-on-module slot
2 Fast Ethernet, 4 USB 2.0, 1 UART
DVI-I, audio I/O, TTY
PCI Express Mini Card slot and SIM card holder
USB Flash disk slot
microSD card holder
SATA for external hard disk on board
-40°C to +85°C screened

ESMini Carrier Card

One ESMini slot
J1 and J2 assembled

Memory

One SATA connector
One USB Flash disk slot
- Via one USB onboard connector
One microSD card slot

Graphics

One DVI-I connector

Analog VGA signals via LVDS interface

I/O

Four USB 2.0 host connectors, one optionally usable as client
10/100Base-T Ethernet
- Two interfaces on RJ45 connectors
Audio
- Audio in
- Audio out
- Via 3.5 mm jack
RS232/RS422/RS485
- One interface via 9-pin D-Sub connector
- Configurable via software
TTY
- Max. transfer rate 4800 bit/sec
- Active or passive
- Electrically isolated
GPIO
- 8 lines on a 10-pin connector (5 V level, for connection of an SA-Adapter)
- 16 lines on an 18-pin connector (3.3 V level)

One PCI Express Mini Card slot

With SIM card slot
Via one PCI Express x1 links and one USB port

Miscellaneous

Goldcap
Battery holder
Power button signal on pin header
Reset in/out on pin header

Electrical Specifications

Supply voltage/power consumption:
- ATX standard power supply via 4-pin connector
- +5 V, 2.1 A max.
- +12 V (12 V only for LVDS backlight), (depends on the display) 0.7 A with SHARP LQ121S1LG61 (12.1" / 800x600) with full brightness
- Power supply cable should have a cross section of at least 1.5 mm²
MTBF: 683,499 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: 146x102 mm
Weight: 142 g (without ESMini module)

Environmental Specifications

Temperature range (operation):
- -40..+85°C
- Airflow depending on ESMini module
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300 m to +2,000 m
Bump: 10 g/16 ms

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

XC6 - ESMini COM Carrier Board for 3.5" PCs (Product Discontinued)

Features

Specifications

Accessories - PCI Express Mini Cards

Software

Documentation

Applications

Products

Company